Altium Designer 기술문서
...
Retired Documentation - Projects
((Project Compiler Violations Reference))_AD
WorkspaceManager_Err-NetsWithOnlyOnePinNets with Only One Pin_AD
Created: June 05, 2015 | Updated: August 05, 2021
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 15.1. For the latest, read: WorkspaceManager_Err-NetsWithOnlyOnePin((Nets with Only One Pin))_AD for version 21
Parent category: Violations Associated with Nets
Default report mode: 
Summary
This violation occurs when a net in the design has been detected to contain only one component pin.
Notification
If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog) an offending object will display a colored squiggle beneath it. A notification is also displayed in the Messages panel in the following format:
Net <NetName> has only one pin (Pin <PinName>)
where:
- NetName is the name of the parent net.
- PinName is the component designator-pin designator identifier.
Recommendation for Resolution
By default, this message will not appear in the Messages panel. If you have enabled reporting for this violation type and want to resolve the issue, simply ensure that the offending net is wired to at least two component pins in the design.
