系统要求

Chinese - Translation is available for Altium Designer 22: Go to the page

Ensure that your computer meets the system requirements detailed below, prior to installing Altium Designer. Below are the recommended and minimum system requirements to install and run Altium Designer.

Recommended System Requirements

  • Windows 11 (64-bit only)

    Windows 10 (64-bit only) is still supported, although not recommended.

  • Intel® Core™ i7 (or later) processor or equivalent

  • 16 GB RAM

  • 10 GB hard disk space (Install + User Files)

  • SSD

  • High-performance graphics card (fully supporting DirectX 11 or better), such as GeForce GTX 1060/Radeon RX 470

  • Dual monitors with 2560x1440 (or better) screen resolution

  • 3D mouse for 3D PCB design, such as the SpaceMouse®

  • Adobe® Reader® (version XI or later for 3D PDF viewing)

  • Internet Connection

  • Up to date Web browser

  • Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2016 (required for DbLibs) – this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit.

Some keyboard shortcuts that are used within the software require a numeric keypad.

Minimum System Requirements

  • Windows 11 (64-bit only)

    Windows 10 (64-bit only) is still supported, although not recommended.

  • Intel® Core™ i5 processor or equivalent

  • 4 GB RAM

  • 10 GB hard disk space (Install + User Files)

  • Graphics card (fully supporting DirectX 11 or better), such as GeForce 600 series/Radeon HD 5000 series/Intel HD 4600

  • Monitor with at least 1680x1050 (widescreen) or 1600x1200 (4:3) screen resolution

  • Adobe® Reader® (version XI or later for 3D PDF viewing)

  • Up to date Web browser

  • Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2016 (required for DbLibs) – this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit.

Some keyboard shortcuts that are used within the software require a numeric keypad.

Connection to Altium 365

Following industry best practices for security and data integrity, the Altium Platform (Altium 365) supports TLS (Transport Layer Security) 1.2.

As part of the platform solutions from Altium – Altium Develop and Altium Agile – Altium Designer Develop and Altium Designer Agile inherently include support for TLS 1.2 in order to connect to their respective Workspaces on the Altium Platform (Altium Develop Workspace and Altium Agile Workspace).

Note that while an older, standalone version of Altium Designer can connect to a platform solution's Workspace, you must be using Altium Designer 20.1.14 or later, which includes support for TLS 1.2, to do so.

In addition, your version of Windows OS must have TLS1.2 support enabled. Windows 11 (64-bit only), Windows 10 (64-bit only), and Windows 8.1 (64-bit only) natively support TLS1.2. If you are using Windows 7 SP1 (64-bit only) you will need to enable TLS1.2 manually. See How to enable TLS1.2 on clients for more information.

DPI Scaling Support

The following table shows the maximum DPI Scaling supported, based on the vertical resolution of the monitor being used.

Monitor Vertical Resolution (pixels) Maximum DPI Scaling Supported
1024 to 1200 100%
1600 125%
1800 200%
2K and above 250%

When using multiple monitors, note that Altium Designer does not support different DPI Scaling values set for different monitors. For all UI elements, the DPI Scaling of the main monitor will be used.

Other Considerations

The Importance of a Good Graphics Card

Graphics cards are a critical hardware element that can have a large impact on both the performance and stability of systems. Choose the right hardware requirements necessary to achieve stunning results, make the whole system more responsive and ‘feel’ better, and remove distractions to design caused by lags in the GUI. This version of Altium Designer has been optimized for use with DirectX 11 and requires a graphics card that supports this. Altium has chosen DirectX rather than OpenGL for its graphics engine, which has become the preferred standard for gaming graphics cards. An advantage of this choice is the fact that gaming cards are often significantly less expensive than workstation cards of equivalent performance. We therefore strongly recommend the use of a gaming card instead of a workstation card.

The need for a high-performance graphics card is directly related to the amount of use of the 3D PCB capabilities. For example, a Core i7 processor with on-chip integrated HD4000 graphics will be more than adequate if you only require occasional use of the 3D PCB capabilities. If you intend to make extensive use of the 3D PCB features, for computationally intensive tasks such as 3D video or interactive presentations, then it is recommended to use a high-performance gaming graphics card in combination with a 3D mouse, such as the SpaceMouse®.

The key parameter of a Graphical Processing Unit (GPU) for higher performance in Altium Designer is its processing power in terms of floating point operations per second (FLOPS). It is not recommended to use GPUs with a performance lower than 700 GFLOPS. Above this level, performance grows proportionally. By way of example, one of the recommended graphics cards – the Radeon RX 470 – possesses a GPU whose performance is 3793 GFLOPS.

Altium Design File Storage

Due to some issues related to file systems for Linux, it is not recommended to use Linux as a file server to store Altium design files.

Altium Designer on Virtual Machines and Emulators

Note that running Altium Designer on virtual machines and emulators is not supported. When running Altium Designer on a virtual machine or emulator, you may experience unexpected performance issues.

WebView2

For browser-related elements within Altium Designer (e.g., the Home page), WebView2 is used. This delivers access to the latest web browser engine within Altium Designer, just by updating Windows.

This feature is in Open Beta and available when the System.UseWebView2 option is enabled in the Advanced Settings dialog. Note that when disabled or if a connected Workspace does not support WebView2, CefSharp v.126 will automatically be used.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
功能可用性

您可使用的功能取决于您所选择的 Altium 解决方案 —— Altium DevelopAltium Agile(Agile Teams 或 Agile Enterprise 版本),或仍在有效订阅期内的 Altium Designer。

如果您在软件中未找到文中提及的功能,请联系 Altium 销售团队了解更多信息。

旧版文档

Altium Designer 文档不再提供版本区分。如果您需要访问 Altium Designer 旧版本的文档,请前往其他安装程序页面的旧版文档部分。

Content