Altium NEXUS Documentation


Created: July 7, 2022 | Updated: July 7, 2022

Parent page: InteractiveProperties Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: Action=Toggle|SetFocus=True


This command is used to quickly toggle the display of the Properties panel.


This command is accessed from the Schematic Editor, Schematic Library Editor, PCB Editor, PCB Library Editor, and Layer Stackup Editor by using the F11 keyboard shortcut.


After launching the command, the Properties panel will either disappear or reappear, depending on whether it is currently visible or not.


  1. If the panel is part of a group of panels, using this command will make it the active panel in the group - bringing it to the front in docked or floating modes, and popping it out in pop-out mode.
  2. Using this command will toggle the display of the panel in the position and mode in which it was last placed.
  3. A currently visible panel will have a 'tick' icon next to its menu entry.
  4. The panel can also be toggled, with respect to its visibility, using the View » Panels » Properties command, or by clicking the  button (available on the right of the Status Bar) and choosing the Properties menu entry.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: