Altium Designer Documentation

Configuring PCB Center Dimension Object Properties in Altium Designer

Created: March 21, 2019 | Updated: July 27, 2020

Parent page: Center Dimension

PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Center Dimension object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select Center Dimension in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Center Dimension object properties are available for editing in the Properties panel when a placed Center Dimension is selected in the workspace.

The Center Dimension default settings in the Preferences dialog and the Center Dimension mode of the Properties panel   The Center Dimension default settings in the Preferences dialog and the Center Dimension mode of the Properties panel   The Center Dimension default settings in the Preferences dialog and the Center Dimension mode of the Properties panel

In the below Properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only." 

Properties

  • Layer - the layer to which the dimension is currently assigned. Dimensions can be assigned to any available layer. Use the drop-down to select a different layer.
  • Rotation (Properties panel only) - the angle of alignment of the dimension, measured counterclockwise in degrees from the horizontal.
  •  Size -  the current length of the dimension's crosshair lines (or the diameter of the encompassing circle). 

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: