Region

Now reading version 1.0. For the latest, read: Region for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Multi-board Schematic Objects

A placed RegionA placed Region

Summary

A Region is a closed shape object that can be placed on a multi-board Design document to indicate a specific area in the schematic. The Region object shape can include angle-based curved lines.

Availability

Regions are available for placement in the multi-board schematic editor as follows:

  • Choose the Place » Region command from the main menu.
  • Click the  button in the graphic objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
  • Right-click in the drawing design space then select Place » Region from the context menu.

Placement

After launching the command, the cursor will change to a cross-hair and the editor will enter Region placement mode. Placement is made by performing the following sequence of actions:

  1. Click to place the first vertex of the Region shape.
  2. Move the cursor and click to place the second vertex of the Region shape.
  3. Continue to place further region vertices to complete the Region shape.
  4. After the final vertex is placed, right click or press Esc to complete the Region shape back to the first-placed vertex.

Straight lines will be drawn between each vertex as they are placed, however the Shift+Spacebar shortcut can be used to cycle through other line options such as a 90° corner, 45° corner, curved 90° corner or curved 45° corner – this applies to the line segment between the cursor and the previously placed vertex. Once an option is selected, use the Spacebar to toggle the direction of the corner.

The default settings for the Region object are available in the Multi-board Schematic - Defaults page of the Preferences dialog.

Graphical Editing

This method of editing allows a placed Region object to be selected in the design space and graphically edit its size, shape or location.

Select a Region by clicking on its fill or outline. Once selected, editing handles/nodes are available at each of the shape's verticess.

 A selected Region shape is edited by dragging line or vertex nodes. A selected Region shape is edited by dragging line or vertex nodes.

  • Drag (click+hold+move) any part of the Region, but not a node, to reposition it on the document.
  • Drag the center mark of a line segment to move that line in the perpendicular (maintaining its angle) to a new location.
  • Drag a corner vertex node to move it to a new location and alter the Region shape.
  • Ctrl+drag on a line, but not its center mark, to add a new node.
  • Press Delete while dragging a node to delete it from the shape.

Non-Graphical Editing

Properties page: Region Properties

The non-graphical method of editing a Region is available in the multi-board Properties panel, which provides editable property fields for the item that is currently selected in the design space.

The Properties panel when a Region object is selected.The Properties panel when a Region object is selected.

To open the Properties panel and access the properties of a placed Region:

  • Double-click on the Region object.
  • Right-click on the Region then select Item Properties from the context menu.

If the Properties panel is already active:

  • Click on the Region to access its properties in the panel.
To manually open the Properties panel, select View » Panels » Properties from the main menu or click the button at the bottom right of the design space then select Properties from the pop-up menu.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content