Altium NEXUS Documentation

TextEdit_Cmd-MoveCursorRightOneWordMoveCursorRightOneWord_AD

Created: July 27, 2015 | Updated: April 11, 2017
Applies to Altium NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command enables you to use the keyboard to move the text cursor to the right in the current document, one word at a time.

Access

Access to this command is made using the Ctrl+Right Arrow keyboard shortcut only.

Use

Launch the command to move the text cursor to the right by one word. Use the command repeatedly to jump the text cursor to the beginning of each subsequent word.

Tips

  1. This command is not constrained to the current line. Repeated use of this command will ultimately move the text cursor all the way down to the end of the document.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: