Lines are available for placement in the multi-board schematic editor as follows:
Choose the Place»Line command from the main menu.
Click the button in the graphic objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
Right-click in the drawing design space then select Place » Line from the context menu.
After launching the command, the cursor will change to a cross-hair and the editor will enter Line placement mode. Placement is made by performing the following actions:
Click to define the starting position of the Line.
Move the cursor to set the length and angle the Line then click again to complete placement.
Continue placing further Lines or right-click or press Esc to exit the placement mode.