Altium Designer Documentation

SectioningView

Modified by Jason Howie on Oct 18, 2017
このページは、サポート対象外となったAltium Vaultについて紹介しています。Altium Vaultとそのコンポーネント管理機能は Altium Concord Proに移行しました。

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Mode=View|Action=Toggle

Summary

This command is used to toggle section view for the active Multi-board Assembly document (*.MbaDoc) On or Off. Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Toggle Section View command from the main menus.
  • Using the Shift+Ctrl+V keyboard shortcut.

Use

After launching the command, section view mode for the assembly will be enabled or disabled, depending on its state previous to running the command.

Tips

  1. Section view mode can also be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  2. Whether the section view editing plane(s) are displayed or not depends on the active setup for those planes - controlled also from the Section View section of the View Configuration panel.


Applied Parameters: Mode=Edit|Action=Toggle

Summary

This command is used to toggle the display of the section view's editing planes, for the active Multi-board Assembly document (*.MbaDoc), On or Off. Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Edit Section View Planes command from the main menus.
  • Using the Shift+Ctrl+E keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, section view editing planes for the assembly will be displayed or hidden, depending on their state previous to running the command.

Tips

  1. While editing planes are displayed, you can not edit parts of the assembly.
  2. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  3. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneVisibility|Action=Toggle|Plane=X

Summary

This command is used to toggle the display of the section view's X-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc), On or Off. Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Toggle Section Plane X command from the main menus.
  • Using the 1 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view X-axis editing plane for the assembly will be displayed or hidden, depending on its state previous to running the command.

Tips

  1. While editing planes are displayed, you can not edit parts of the assembly.
  2. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  3. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneVisibility|Action=Toggle|Plane=Y

Summary

This command is used to toggle the display of the section view's Y-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc), On or Off. Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Toggle Section Plane Y command from the main menus.
  • Using the 2 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view Y-axis editing plane for the assembly will be displayed or hidden, depending on its state previous to running the command.

Tips

  1. While editing planes are displayed, you can not edit parts of the assembly.
  2. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  3. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneVisibility|Action=Toggle|Plane=Z

Summary

This command is used to toggle the display of the section view's Z-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc), On or Off. Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Toggle Section Plane Z command from the main menus.
  • Using the 3 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view Z-axis editing plane for the assembly will be displayed or hidden, depending on its state previous to running the command.

Tips

  1. While editing planes are displayed, you can not edit parts of the assembly.
  2. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  3. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneFlip|Action=Toggle|Plane=X

Summary

This command is used to flip the section view's X-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc). Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Flip Section Plane X command from the main menus.
  • Using the Ctrl+1 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view X-axis editing plane for the assembly will be flipped.

Tips

  1. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  2. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneFlip|Action=Toggle|Plane=Y

Summary

This command is used to flip the section view's Y-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc). Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Flip Section Plane Y command from the main menus.
  • Using the Ctrl+2 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view Y-axis editing plane for the assembly will be flipped.

Tips

  1. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  2. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.


Applied Parameters: Mode=PlaneFlip|Action=Toggle|Plane=Z

Summary

This command is used to flip the section view's Z-axis editing plane, for the active Multi-board Assembly document (*.MbaDoc). Being able to section parts of an assembly allows you to operate with objects of printed circuit boards which are otherwise covered by other 3D objects or their parts.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Flip Section Plane Z command from the main menus.
  • Using the Ctrl+3 keyboard shortcut.
The command is only available provided section view mode is currently enabled.

Use

After launching the command, the section view Z-axis editing plane for the assembly will be flipped.

Tips

  1. Section view mode can be toggled using the On and Off buttons associated to the Section View control, in the Section View section of the View Configuration panel.
  2. The display of section view editing plane(s) can also be controlled from the Section View section of the View Configuration panel, with fine-level control over which plane(s) are presented, and whether they are flipped or not.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。