Altium NEXUS Documentation

ConvertKeepoutToPrim

Created: 12.06.2017 | Updated: 13.07.2018

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to convert existing Keepout objects back to their primitive design objects. A Keepout in PCB design is a user defined area or perimeter placed in the layout that copper objects cannot intersect. Typically included to control the area used by automated copper placement actions, such as polygon pours and interactive routing, a Keepout also represents an invalid location when manually placing copper objects. Placed Keepout objects can be configured to specify which type objects they apply to, such as tracks, copper areas, vias and pads, which significantly enhances the flexibility and effectiveness of Keepouts.

For more information on Keepouts, see Object Specific Keepouts.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Convert Selected Keepouts to Primitives command from the main menus.

Use

First, ensure that the keepout objects that you wish to convert are selected within the design workspace.

After launching the command, the selected keepouts will be converted back to their corresponding primitives.

Tips

  1. Primitive objects can be converted (back) to their equivalent Keepout objects using the Tools » Convert » Convert Selected Primitive to Keepouts command.
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: