Applied Parameters: MovieIndex=n (where n is in the range 0 to 20)
This command is used to add a new Key Frame to the indicated PCB 3D Movie (or PCB 3D Video), allowing for more streamlined creation of a key frame sequence right in the 'thick of the camera action' as it were, without having to change focus to the PCB 3D Movie Editor panel. A PCB 3D Video is generated from a sequence of key frames, i.e. snapshots of your board, that, when published in a video format, result in a smoothly interpolated movie that can be used to highlight and showcase your board and key elements of it.
The related indexed commands are accessed from the PCB Editor, in 3D Layout Mode, from the right-click Add Key Frame to 3D Movie context sub-menu. The menu lists all currently defined 3D movies for the active PCB, with the currently selected movie (in the PCB 3D Movie Editor panel) distinguished by a tick. Up to 21 movies will be listed by title in the menu, corresponding to the applied parameter index range.
First, position the 3D view of your board in the PCB Editor as required. Then select the movie to which you want to add the key frame. Clicking on a movie name in the Add Key Frame to 3D Movie menu will add a new key frame - based on the current view of the board in the workspace - to the end of the key frame sequence for that movie.
To add another frame to the same 3D movie, set up the board as required and click on the entry for that movie again in the menu. To add a frame to a different movie, click on that movie's entry in the menu.
- Each key frame is a snapshot in your movie. By defining a number of these snapshots - the key frame sequence - the final, generated video output is made by smoothly interpolating the n-1 intervals between your n key frames.
- A key frame added from the PCB Editor is always added at the end of a key frame sequence. It cannot be inserted at a specific position within a key frame sequence. This can only be achieved from within the PCB 3D Movie Editor panel.
- If your PCB has more than 21 movies defined for it, you can click on the More 3D Movies entry to open the Choose PCB 3D Movie dialog in which you can select the movie to which you want to add the key frame.