Altium NEXUS Documentation

ToggleComponentDesignatorComment

Created: 03.08.2017 | Updated: 21.07.2018

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Object=Designator|ContextObject=Component

Summary

This command is used to toggle the display of the designator - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Designator command (if the designator is currently shown), or the Component Actions » Show Designator command (if the designator is currently hidden) from the context menu.

Use

After launching the command, the component's designator will either be hidden or made visible depending on whether it is currently visible or not.

Tips

  1. This command toggles the component's Show Designator property (when viewed through the PCB List panel). Display of the designator can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Designator field, which will reflect the designator as being displayed () or hidden (), respectively.


Applied Parameters: Object=Comment|ContextObject=Component

Summary

This command is used to toggle the display of the comment - between not hidden and hidden - for the component under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a placed component in the workspace then choosing the Component Actions » Hide Comment command (if the comment is currently shown), or the Component Actions » Show Comment command (if the comment is currently hidden) from the context menu.

Use

After launching the command, the component's comment will either be hidden or made visible depending on whether it is currently visible or not.

Tips

  1. This command toggles the component's Show Comment property (when viewed through the PCB List panel). Display of the comment can also be controlled when viewing the properties for the selected component in the Properties panel. Click the control to the right of the Comment field, which will reflect the comment as being displayed () or hidden (), respectively.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: