Altium NEXUS Documentation

PCB_Cmd-ReportBoardSpecsReportBoardSpecs_AD

Created: 07.07.2022 | Updated: 07.07.2022
На этой странице документации упоминается Altium NEXUS/NEXUS Client (часть развернутого решения NEXUS), поддержка которого прекращена. Все ваши потребности в проектировании печатных плат, управлении данными и совместной работе теперь могут быть реализованы с помощью Altium Designer (с подпиской Altium Designer Enterprise) и подключенного рабочего пространства Altium 365 Workspace. Посетите страницу часто задаваемых вопросов (FAQs) для получения дополнительной информации.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ReportKind=Component

Summary

This command is used to generate a report for the active PCB board in the current PCB document.

Access

This command is accessed from the PCB Editor by choosing the Reports » Board Information command from the main menus.

Use

After launching the command, the Board Report dialog will open, displaying a list of items that you may select to be included in your board report. Select Report after choosing the items you'd like a report on to generate a Board Information Report document, where you may view the board specification, copper area, and board hole sizes, along with other information, of the items selected.


Applied Parameters: ReportKind=Component

Summary

This command is used to generate a report for the active PCB 2D/3D Component model in the current PCB Library document.

Access

This command is accessed from the PCB Library Editor by choosing the Reports » Component command from the main menus.

Use

After launching the command, the report will be generated (<PCBLibraryDocumentName>.CMP) in the same folder as the source PCB library document and will automatically be opened as the active document in the main design window. The report lists information including footprint dimensions and a breakdown of the primitive objects that constitute the footprint and the layers on which they reside.

Tips

  1. The report will be added to the Projects panel as a free document under the Documentation\Text Documents sub-folder.


Applied Parameters: ReportKind=Library

Summary

This command is used to generate a report listing all PCB 2D/3D Component models in the current PCB Library document.

Access

This command is accessed from the PCB Library Editor by choosing the Reports » Library List command from the main menus.

Use

After launching the command, the report will be generated (<PCBLibraryDocumentName>.REP) in the same folder as the source PCB Library document and will automatically be opened as the active document in the main design window. The report summarizes the total number of component models in the library and lists all of the component models by name.

Tips

  1. The report will be added to the Projects panel as a free document under the Documentation\Text Documents sub-folder.
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: