Altium NEXUS Documentation

ResetOrigin

Created: 27.07.2015 | Updated: 17.07.2018

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to set the relative origin back to the default absolute origin at the extreme lower-left of the document workspace.

Access

This command is accessed from the PCB Editor by choosing the Edit » Origin » Reset command from the main menus.

Use

After launching the command, the absolute origin - at the lower-left of the document workspace - will become restored with coordinates (0,0).

Tips

  1. Once the absolute origin has been restored, the screen will refresh and all design objects will have their locations recalculated, relative to this default origin.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: