PCB_Dlg-ComponentRuleCheckComponent Rule Check_AD

Applies to NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

The Component Rule Check dialog
The Component Rule Check dialog

Summary

The Component Rule Check dialog allows you to specify rules to check a component that is currently active in the PCB library.

Access

The dialog is accessed from the PCB Library Editor by clicking Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

  • Pads - enable this option to check for components with duplicate pads.
  • Primitives - enable this option to check for components with duplicate primitives.
  • Footprints - enable this option to check for components with duplicate footprints.

Constraints

  • Missing Pad Names - enable this option to check for components with missing pad names.
  • Mirrored Component - enable this option to check for components that are mirrored.
  • Offset Component Reference - enable this option to check for components with the component reference offset.
  • Shorted Copper - enable this option to check for components with shorted copper.
  • Unconnected Copper - enable this option to check for components with unconnected copper.
  • Check All Components - enable this option to check all components in the library.
After clicking OK, a Component Rule Check Report with the extension *.ERR will be generated that lists the violations based on the options you enabled.
Content