Altium NEXUS Documentation

ChartSettings

Created: 12.06.2016 | Updated: 11.04.2017

Parent page: SimView Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to run the Chart Options dialog, from where you can define various settings for the currently active chart in the Waveform Analysis window.

Access

This command can be accessed from the SimData Editor by:

  • Choosing the Chart » Chart Options command from the main menus.
  • Right-clicking within the active chart (away from Y-axis and waveform names) and choosing the Chart Options command from the context menu.
  • Right-clicking on the chart's tab (at the bottom of the Waveform Analysis window) and choosing the Chart Options command from the context menu.

Use

After launching the command, the Chart Options dialog appears. Use the dialog to define a name and title for the chart, and to define the X-axis, in terms of label, scale, and grid type.

Tips

  1. If one or both cursors have been added to a waveform, you can determine the cursor measurements to be displayed under the parent plot, through options available on the Chart Options dialog's Cursors tab.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: