Altium NEXUS Documentation

SetCurrentAnalysis

Created: 12.06.2016 | Updated: 11.04.2017

Parent page: SimView Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action = Next

Summary

This feature enables you to make the next available analysis chart, the current chart, in the Waveform Analysis window.

Access

This command is accessed from the SimData Editor by using the + (on the numeric keypad) keyboard shortcut.

Use

Depending on the analyses performed during the simulation, there will be a corresponding number of analyses tabs at the bottom of the Waveform Analysis window. Each tab contains a chart in which the results of analysis can be seen graphically, through the use of waveforms. Simply use this feature to make the next chart in the series (to the right), the active one. Use the feature repeatedly to cycle forward (to the right) through all available analyses charts.


Applied Parameters: Action = Previous

Summary

This feature enables you to make the previous available analysis chart, the current chart, in the Waveform Analysis window.

Access

This command is accessed from the SimData Editor by using the - (on the numeric keypad) keyboard shortcut.

Use

Depending on the analyses performed during the simulation, there will be a corresponding number of analyses tabs at the bottom of the Waveform Analysis window. Each tab contains a chart in which the results of analysis can be seen graphically, through the use of waveforms. Simply use this feature to make the previous chart in the series (to the left), the active one. Use the feature repeatedly to cycle backward (to the left) through all available analyses charts.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: