Altium NEXUS Documentation


Created: 12.06.2016 | Updated: 11.04.2017

Parent page: SimView Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to remove a Y-axis from the active wave plot in the current chart.


This command can be accessed from the SimData Editor by:

  • Choosing the Plot » Remove Y Axis command from the main menus.
  • Right-clicking on the Y Axis and choosing the Delete Axis command from the context menu.


First, ensure that the wave plot, from which you wish to remove the Y-axis, is made active in the Waveform Analysis window. This is achieved by clicking anywhere within the area of the wave plot.

Click on the specific Y-axis that you wish to remove and launch the command - the selected Y-axis will be removed.


  1. If the Number of Plots Visible option is set to All in the Document Options dialog (Tools » Document Options), the active wave plot is distinguished by a black solid line around its waveform name section. If the Number of Plots Visible option is set to 1, 2, 3, or 4, the active wave plot is distinguished by a black arrow at the left hand side of its display area.
  2. In order to view multiple Y-axes that have been defined, you must set the display option for the Number of Plots Visible to anything but All.


Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: