Altium Designer Documentation

Working with the Daisy Chain Stub Length Design Rule on a PCB in Altium Designer

Created: March 23, 2017 | Updated: September 26, 2019
All Contents

Rule Category: High Speed

Rule Classification: Unary

Summary

This rule specifies the maximum permissible stub length for a net with a daisy chain topology.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraints for the Daisy Chain Stub Length rule.Default constraints for the Daisy Chain Stub Length rule.

  • Maximum Stub Length - the value for the maximum stub length allowed.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: