Altium Designer Documentation

Working with the Height Design Rule on a PCB in Altium Designer

Created: February 23, 2016 | Updated: April 11, 2017
All Contents

Rule category: Placement

Rule classification: Unary

Summary

This rule specifies height restrictions for components placed within the design.

Constraints

Default constraints for the Height rule.

  • Minimum – the value for the minimum permissible component height.
  • Preferred – the value for the preferred component height.
  • Maximum – the value for the maximum permissible component height.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

The Preferred setting is obeyed when displaying the board in 3D. The Minimum and Maximum settings are obeyed by the Online DRC and Batch DRC.

Tips

  1. The height property for a component is defined in its associated properties dialog.
  2. A component class can be created and used in the scope definition for a height rule, in order to flag any member components whose height violates the specified height constraint criteria of the rule.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: