Parent page: Working Between the Schematic and the Board
Whether you're transferring a captured design to a new PCB for the first time, or making changes to an existing design on either the schematic or PCB side, some way of keeping the two sides in-sync is required. Altium Designer provides a powerful design synchronization feature that delivers an effective solution to the problem of keeping the design synchronized, allowing the designer to keep their focus on the creative aspects of the design process.
Design synchronization is performed directly between the schematic and PCB editors, there is no intermediate, netlist-like document used. The software uses a comparator engine to compare all aspects of the design, detailing the output as a list of differences. The designer decides which side should change to resolve the differences, and a set of Engineering Change Orders (ECOs) is created. These are then applied, bringing the two sides of the design back in to sync.
The synchronization process ensures that the component and connective data on the schematic, matches the component and connective data on the PCB. As well as the component and connective data, the synchronization process also ensures that other design constraints; such as net classes, component classes and design rules, are also in sync.
Dialog page: Options for PCB Project, Comparator tab
Exactly what schematic and PCB data gets compared, is configured in the Comparator tab of the Options for PCB Project dialog. Select Project » Project Options to open the dialog.
The main region of the dialog includes a large list of Comparison Types, such as Different Designators and Changed Net Name, which are grouped in 5 categories. The Mode column on the right includes a dropdown for each, where you select the mode of comparison, such as
Find Differences or
Ignore Differences. Text-type comparisons have a third option, to allow the comparison to be case-insensitive.
The default for a new project is to Find Differences for every comparison type, set the options as required for your project.
Across the bottom of the dialog there are options for setting the Object Matching Criteria. Matching is a sophisticated, multi-pass process that does not rely on simple exact string matching. To learn more refer to the Matching the Nets and Classes topic later in the article.
Note the Ignore Rules Defined in the PCB Only option down the bottom of the dialog, enable this to exclude the rules you have defined in the PCB, from the comparison process.
Dialog page: Options for PCB Project, Class Generation tab
As well as component and connective data, you can also generate and synchronize classes and design rules when you perform a Design » Update PCB. There are two types of classes that can be generated from the schematic and synchronized to the PCB:
The generation of these are configured in the Class Generation tab of the Options for Project dialog (the synchronization is controlled by options in the Comparator tab).
Net classes can be automatically generated for the following groups of nets:
|Named Signal Harnesses||Signal harnesses are used to bundle and transport multiple nets across a schematic project. The harness is not used to name the nets carried within that harness, except when the harness has a net label placed on it. Note that placing a net label on a signal harness changes the net naming syntax, from being the individual net labels placed on the wires, to being
|Buses / Bus Sections||Enable the Generate Net Classes for Buses option to create a PCB net class for each bus (and each bus slice if the sub-option is enabled), during design synchronization. This is a global option that is applied to the entire project.|
|Components||This option creates a net class for each component in the design, containing all of the nets connected to that component. This is a global option that is applied to the entire project.|
|Sheets||Generate a net class for the nets within each sheet, as per the chosen scope. Note that Local Nets Only scope option will not include nets that enter or exit the sheet. Note also that a net can belong to more than one PCB net class, so the All Nets option will result in all of the sheet-spanning nets appearing in multiple classes. This option is configured for each schematic sheet.|
It is common for the schematic project to be structured over multiple sheets, with each sheet representing a logical block of the overall design. Supporting this, you can automatically generate a component class that contains all of the components on that sheet, for each of the schematic sheets in the project, by enabling the appropriate Component Class checkbox. The PCB component class will have the same name as the Designator of the sheet symbol that references that schematic sheet. A component class will not be created if the sheet does not contain any components.
A room is a polygonal-shaped object that is an aid to component placement, these are created automatically for each schematic sheet that has the Generate Rooms checkbox enabled. In the PCB, each room is defined as a design rule, which will be created with the scope of
InComponentClass('<SheetSymbolDesignator>'). A room will not be created if the sheet does not contain any components. When the schematic is initially transferred to the PCB, the components in each component class are arranged in a row, and then a room is created around that component class, as shown below.
A structure class can include net classes, component classes, and lower-hierarchical-level structure classes, as its members. A structure class is created for each sheet that the option is enabled for, and will include the sheet-level component and net classes, if those options are enabled for that sheet. Edit the Structure Class in the PCB editor to add other net / component / structure classes. Use the Structure mode of the PCB panel to locate the components and nets in that structure class.
You can also create user-defined component classes and net classes, by attaching a parameter to the relevant component or net. PCB component and net classes will then be created if the appropriate User-Defined Classes checkboxes are enabled in the Class Generation tab of the Options for Project dialog.
In the schematic, you can specify that a component be added to a PCB component class when the schematic is synchronized with the PCB.
To do that, you add a parameter to the component, with the parameter Name string set to
ClassName, and the parameter Value string set to the required
<PCB_ComponentClassName>, as shown in the example image below.
Object page: Parameter Set
To add a net (or the nets in a bus or signal harness) to a PCB net class, you need to attach a parameter to that net / bus / harness. You do that by placing a Parameter Set object with its end touching the net / bus / harness, as shown in the image below. You can either place the Parameter Set object ( Place » Directives » Parameter Set) and then manually add a parameter to it, or you can place a pre-configured Parameter Set object using the Place » Directives » Net Class command.
The parameter must have the Name set to
ClassName, and the parameter Value set to the required
Object page: Blanket
You can also add multiple nets to a PCB net class by placing a Blanket directive that covers all of those nets. The function of a Blanket is to allow you to apply a directive to all of the nets under the blanket (either identified by a net identifier, such as a Net Label or Power Port that is under the blanket, or a net that has an end vertex contained within the Blanket). Instead of placing the Parameter Set directive so that it touches a wire, you place it so that it touches the edge of the blanket, as shown in the image below. Note that it is the value of the Parameter within the Parameter Set object that defines the PCB net class name, not the display name of the Parameter Set object.
As with classes, design rules are also applied in the schematic as a parameter. In each object that you can add parameter, for example a component or a Parameter Set object, there is an Add as Rule button.
Clicking the Add as Rule button adds a parameter with the Name set to
Rule. When this parameter name is used, the Parameter Properties dialog will include an Edit Rule Values button. Click this button to open the Choose the Design Rule Type dialog. After selecting the required design rule, the last stage is to define the rule constraints in the Edit PCB Rule dialog.
In both the image above and the image below, the design rule is defined in a Parameter Set object that is attached to a blanket. By including a ClassName parameter in that Parameter Set object a PCB net class will also be created, and because the class definition is present, the PCB rule will be scoped
In the image below you will notice that the Parameter Set object is displayed as a Differential Pair directive. This is also a Parameter Set object, in this case it has a Parameter with the Name
DifferentialPair and a Value of
True. When the software sees a Parameter Set object with this parameter, it recognizes it as a differential pair directive and displays it as a Differential Pair symbol, instead of the default Parameter Set object. You can place a pre-configured Differential Pair directive via the Place » Directives » Differential Pair command, which places with this parameter already defined.
In the example shown above, there are three parameters in the Parameter Set object, which apply to all of the nets under the blanket in the following way:
|Parameter Name||Parameter Value||Parameter Function|
|ClassName||ROCKET_IO_LINES||Create a PCB Net Class called ROCKET_IO_LINES , with the net class members being all of the nets detected under the blanket.|
|DifferentialPair||True||Create a PCB differential pair for each pair of suitably named nets (matching net names, ending in _P and _N). For the nets in the image, 8 PCB differential pairs will be created. If the Blanket had not been used, you would need to place a Differential Pair directive on each net you wanted included in a pair.|
|Rule||Differential Pair Routing [rule details]||Create a PCB Differential Pair Routing Rule, scoped to PCB Net Class created by the Class Name parameter present in this Parameter Set object.|
The Options for Project dialog also includes an ECO Generation tab. This tab defines which design modifications can have ECOs created. Typically these are all enabled, with the options in the Comparator tab being used to configure which design changes are to be synchronized between the schematic and the PCB.
The design synchronization feature is able to detect and resolve differences in both directions; that is, from the schematic to the PCB, or from the PCB back to the schematic.
The software is actually capable of resolving these differences by applying changes to both sides, at the same time. For example, imagine the scenario where the electronics designer has changed the value of a capacitor, while the PCB designer has changed the footprint of that same capacitor. These two differences can be resolved in a single update process, by applying the comment change as a schematic-to-PCB update, and the footprint change as a PCB-to-schematic update.
When the comparator engine compares the schematic project to the PCB a complete list of differences is created, at this stage there is no assumption on which side must be changed to bring them back into sync.
The list of differences can be seen in the Differences between dialog. To open the Difference between dialog and see a list of differences:
The Differences between dialog will open. The next step is to assign an update direction to each difference:
Once the Update direction has been assigned, click the Create Engineering Change Order button to open the Engineering Change Order dialog, which is described below.
Since the designer normally knows which way they want to apply the updates, and those updates are all in the same direction, you can choose to skip the difference detection and direction assignment process that has just been described.
Rather than selecting the Show Differences command from the Project menu, you choose the Update command from the Design menu, from either the schematic editor or the PCB editor. Your choice of editor from which you run the command, indicates the direction you want the changes to be made - from this editor, to that editor. For example, you would choose Design » Update in the schematic editor to push all changes from the schematic, to the PCB.
The Differences between dialog will now be skipped, instead you will jump straight to the Engineering Change Order dialog.
Dialog page: Engineering Change Order
Each difference is resolved by applying an Engineering Change Order (or ECO for short). The ECOs are listed in the Engineering Change Order dialog with one ECO per line, each with its own Enable checkbox.
When using the Engineering Change Order dialog:
Each schematic component is linked to its PCB component through a Unique Identifier (UID). In the Schematic editor the UID is assigned when the component is placed on the sheet, and that value is transferred to the PCB component when the design is transferred to the PCB editor. While this scheme would be adequate for a simple design, it is not capable of supporting a multi-channel design, where the same schematic component is repeated in each physical channel (which would mean the repeated PCB components would end up with the same UID).
To cater for this, the UID for the PCB component is created by combining the UID of the parent Sheet Symbol with the UID of the schematic component, with the following syntax (shown in the image below):
PcbUID = \SheetSymbolUID\ComponentUID
During synchronization, if the component UIDs do not match the Failed to Match dialog will appear, as shown below. If you click Yes the software will attempt to match all components whose UID does not match, by designator instead. If you click No, the Update process will terminate. There is no danger in matching by designator, but until the UIDs are matched again, you will be asked if you wish to match by designator every time you run the Design » Update command.
To get the UIDs matching again:
Both nets and classes have a parent (the net or class), and children (the members of that net or class). Matching these requires a different approach than the UID mechanism used for component linking, to support changes to: the parent; the children; or both the parent and its children. For example, something as simple as changing the name of a net on the schematic should not require that net and all its children be removed from the PCB, then the newly named net be added, and finally all the children be added to that new net.
To support this, the software includes separate matching algorithms to match nets and classes by their members, and also by their name. The matching process is configured in the Object Matching Criteria section of the Comparator tab of the Options for Project dialog.
Matching for these types of objects is handling in the following way:
Never), the Match Manually dialog will open.
Design rules that are defined on the schematic must also be linked to the matching rule on the PCB. If there was no linking mechanism, you would not be able to update the rule on the schematic and flow those changes to the PCB. Schematic-to-PCB rule matching is like component matching, it is one-to-one. Because of this, UIDs can also be used to link the schematic design rule to the PCB design rule.
The UID is assigned to the parameter that holds the rule definition on the schematic, and transferred to the PCB during design design synchronization.
Typically you will not need to manually manage the matching of rules, unless you have edited the UID in either the schematic or the PCB. If the UIDs do not match, the software will add a new rule to the PCB for any schematic rule that does not have a matching PCB rule, and remove any PCB design rule that does not have a matching schematic design rule.
Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.