Altium Designer Documentation

Collaborate, Compare and Merge

Modified by Tania Mashkoory on Sep 30, 2019
All Contents

Parent page: PCB Panel

Collaborate, Compare,and Merge panel
The Collaborate, Compare and Merge panel

The Collaborate, Compare and Merge panel is command-central for performing a copper comparison between two versions of the same PCB design. It requires that the board is currently under version control and that the repository that it is stored in is configured in the Data Management - Design Repositories page of the Preferences dialog. The panel checks if the board is the latest revision (known as the Head revision). If it is not, it indicates what must be done to bring it up to date.

The board is divided into cells in the Difference Map. When you click on a cell the differences in that cell are detailed in the lower section of the panel, and also in the main workspace. The Difference Map also includes Layer tabs, use these to examine the differences on each layer.

Panel Access

  • To display the panel, click the Panels button at the bottom-right of the workspace when the PCB Editor is active and select the Collaborate, Compare and Merge entry from the pop-up menu.
  • You can also access the panel through the View » Panels » Collaborate, Compare and Merge command.

Panels can be configured to be floating in the editor space or docked to sides of the screen. If the Collaborate, Compare and Merge panel is currently in a group of panels, use the Collaborate, Compare and Merge tab located at the bottom of the panels to bring it to the front.

Terminology and Status Messages


The latest revision committed to the version control system.


The revision the local copy of the document was derived from, also known as the checked out revision.

Working Copy

Local copy of the version controlled document on which editing is performed.

Local changes

Changes made on the working copy that have not been committed to version control.

Status : Up to Date

The base revision is the head revision and no local changes have been made.

Status : Out of Date

The base revision is older than the Head revision and no changes have been made to the working copy.

Status : Modified

The base revision is the Head revision and changes have been made to the working copy.

Status : Merge required

The base revision is older than the Head revision and local changes have been made, i.e., the file is both modified and out of date.


The act of updating the base revision number to the Head revision number. This will transform the status from merge required to modified.

Settings Region

  • Cell Size - displays the cell size when performing comparisons. Use the drop-down to select the desired size.
  • Include Polygon Pours in Comparison - enable to include polygon pours when performing comparisons.
  • Show Differences - enable to show differences.

Actions Region

When you click on a command in this region of the panel to initiate a Comparison, the software compares your file against the latest revision in the repository and displays the differences in the Difference Map region of the panel, as well as in the main editing workspace.

The Actions section of the panel is used for the following:

  • To display, define and clear Progress Regions in the main workspace.
  • To indicate if the board is up-to-date with the repository, define what must be done if it is not, and to initiate Compare and Merge actions.

Version Control Status

When the panel is opened, the software automatically checks the revision number of your board and compares it to the revision number of the Head revision. If they are not the same, the Version control status will indicate what needs to be done to make them the same.

Difference Map Region

When a comparison is performed, the board is divided into cells (the cell size is defined at the top of the panel in the Settings region). The Difference Map presents these cells in a checkerboard fashion. As you hover the cursor over a cell, its cell reference is displayed, such as G4. Click on a cell to display that cell in the main editing window.

Cells that contain differences are shaded in color, the choice of color reflecting ownership of those changes as defined in the color key just below the map of the board. Clicking on a colored cell details all the differences in the Differences section at the bottom of the panel.

  • Layer tabs - select the desired layer to examine the differences on a specific layer.
  • Previous Unchecked / Next Unchecked - use to move backward or forward through the cells in a logical pattern, layer by layer.
  • Set Checked / Clear Checked - use to set or clear the checked differences.

Differences Details Region

The region at the bottom of the panel displays the Difference and Type of difference detected in the currently selected cell. 

Supported Objects

When working in Collaborative PCB Design, some objects/features are not supported by the merge process. Supported/not supported objects are detailed below.


  • Tracks
  • Arcs
  • Fills
  • Solid Regions
  • Pads
  • Vias (also Blind & Buried)
  • Dimensions
  • Coordinates
  • Components

Not supported:

  • Polygon + cutout + board cutout
  • Embedded board array
  • Rooms
  • Origin
  • Grid
  • Free 3D Bodies
  • Guides
  • Rules
Multi-channel design is also not supported by the Collaborative PCB feature.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited


弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited


ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。


Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。


Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited



Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.


その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。





試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。