Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
Pre-placement settings – most Board Fabrication View object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
Post-placement settings – all Board Fabrication View object properties are available for editing in the Properties panel when a placed Fabrication View is selected in the design space.
The Fabrication View default settings in the Preferences dialog and the Board Fabrication View mode of the Properties panel
In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as 'Properties panel only'.
Scale – select the drop-down to choose from a range of preset size scale ratios. This option is not available if the Use Custom Scale option is checked.
Use Custom Scale – select this option to enter a specific scale in its associated field. The scaling of the drawing object is relative to 1, where 0.9 would represent a scale of 90%.
Title – the title name string that will be displayed (if enabled) with the Fabrication View object – use the associated button to toggle its visibility. Enter the title name and any desired system/custom parameters to create a meaningful name for the placed view. See the Parameters section in the panel's Document Options mode for a list of the currently available parameters.
Location – use the drop-down to choose from a range of relative locations for the title. The Manual option is automatically selected if the title is manually moved (dragged and dropped to a new location).
Font – sets the displayed font used for the view's title string.
Use Document Font checkbox selected – the title font used is that defined by the document options. See the Document Font entry in General section of the Properties panel when in Document Options mode.
Use Document Font not selected – use the drop-down menus to choose the desired font type and size and select the lower buttons to enable text attributes. The associated color button () opens the color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.
Border Line – the thickness and style of the Fabrication View's border/outline. Use the line weight drop-down menu to choose from a range of line thickness presets and the line pattern menu to choose from a range of line styles. The associated color button () opens the line color selector dialog as outlined above.
Layer (Properties panel only) – the board layer data that is used as a source for the placed Fabrication View. Use the drop-down menu to select from the range of physical layers available in the board design.
To create a Fabrication Document Template that will include all fabrication-related Layers, set this option to All (for document template) then save the page as a Document Template (*.DwfDot). When the Document Template is subsequently used for a new Draftsman document, a separate page will be created for each Fabrication Layer (Signal and Component layers) of the active board design.
View Side – the direction of view used to render the board drawing. Use the drop-down menu to specify the Top or Bottom view direction.
Rotation – the angle of rotation used to render the board drawing as applied by the drop-down menu.
Drawing Mode – how board conductors are rendered. Use the drop-down to select either Full (solid) or Simplified (as lines) drawing mode. Fills are rendered as selected below.
Polygon Fill Mode – how polygons fills are rendered. Use the drop-down to set fills to be drawn as solid , hatched or as simple outlines.
Show Out of Board Copper – check to enable the display of any copper that has been placed beyond the board design's boundary.
Layers Tab (Properties panel only)
The panel's Layers tab provides a tabular listing of all layers available in the board design, along with their visibility and color settings.
Layer visibility – enable a layer's visibility setting () to allow its content to be rendered as an overlay on the selected Fabrication View. The visibility oof the primary rendering layer, as defined by the Layer setting in the Properties section under the General tab, cannot be disabled.
Layer color – select a layer's button to change its overlay color on the Fabrication View using the color selector drop down, which offers standard color shades plus definable RGB levels.
Move Up/Down buttons – use the buttons to change the listed position of the selected layer and therefore its draw order relative to other layers. The topmost enabled layer in the list is rendered last, on top of the next enabled layer that is lower in the list, and so on – the list order represents the draw order. ► See example.