Altium NEXUS Documentation


Created: June 21, 2017 | Updated: July 17, 2018
このドキュメント ページは、廃止された Altium NEXUS/NEXUS Client (展開された NEXUS ソリューションの一部) を参照しています。PCB 設計、データ管理、共同作業の全ての要求は、Altium Designer (Altium Designer Enterprise サブスクリプション を含む) と、接続された Altium 365 Workspace で利用できます。詳細については、FAQs のページ をご覧ください。

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to define a location in the workspace as the new (relative) origin and sets its coordinates to (0,0).


This command can be accessed from the PCB Editor by:

  • Choosing the Edit » Origin » Set command from the main menus.
  • Clicking the  button on the Utility Tools drop-down () of the Utilities toolbar.


After launching the command, the cursor will change to a crosshair and you will be prompted to select the new relative origin. Position the cursor at the required location in the workspace then click or press Enter. This point will be set to coordinate (0, 0) and all objects in the workspace will have their locations updated relative to this point.


  1. To set the relative origin back to the default absolute origin at the extreme lower-left of the document workspace, use the Edit » Origin » Reset command from the main menus.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: