UnifiedComponent_Dlg-FilterBuilderFilter Builder_AD

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Filter builder dialog

The Filter builder dialog


The Filter builder dialog is used to create more sophisticated and complex filters as needed. Commonly used filters can be saved and re-used. 


The dialog is accessed in the following ways:

  • From the Component Batch Editor, click the Customize button at the bottom right of the editor.
For information about the Component Batch Editor, refer to Component Editor - Batch Component Editing Mode.
  • From the Pick and Place Setup dialog by performing the following steps:
    • Click a filter icon () in the header then choose (Custom...) to open the Custom Filter dialog.
    • In the Custom Filter dialog, add a value in the first textbox then click OK or Enter.
    • Click the Customize button at the bottom of the grid on the right.


  • Filter - click to access additional filter conditions. Click Clear All to clear all filters. Choices are:
    • Add Condition - click to add a filtering condition, such as equals, between, etc.
    • Add Group - click to add a filtering group, such as AND, OR, etc.
  • Links - click the various links to further define the filter.
    • Id - click the various links to choose the desired item by which to filter, for example, Description, Name, etc.
    • AND, etc. - click the various links to specify the logical operator/type, for example, OR, etc.
    • like - click the various links to specify the operator, such as equals, is blank, is greater than, etc.
    • <empty> - click the various links to add a condition value. Enter the desired value in the textbox after clicking the link.
  • press the button to add a new condition - click to add an additional condition.
  • Open - click to open a dialog in which you can search for and select a previously saved filter to reload and reuse.
  • Save As - click to open a dialog in which you can save the current filter in a Filters file (*.flt).
  • OK - click to add the filters you have specified in the dialog and close the dialog.
  • Apply - click to add the filters you have specified in the dialog and keep the dialog open.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.