Altium NEXUS Documentation

DragDrop

Modified by Admin on Apr 11, 2017

Parent page: WorkspaceManager Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ObjectKind=OutputMedium|PasteMode=Printer

Summary

This command is used to quickly create a new Print Job - as part of the active Output Job Configuration file - and associate the selected output generators with that job.

Access

This command is accessed from the OutputJob Editor by dragging the selected output generators, and dropping onto the Hard Copy region of the file - away from existing, defined print jobs.

Use

First, ensure that the output generators you want to associate with the new print job are selected. Then simply drag the selection and drop it onto an area of the Hard Copy region, away from existing print jobs. The new print job will be created, added to the bottom of the current list of print jobs, and named - using the names of the output generators in the selection - in the format:

New Print Job <OutputGeneratorName1>,  <OutputGeneratorName2>, ..., <OutputGeneratorNamen>,

where n is the number of output generators in the original selection.

Tips

  1. Do not drop the selection over an existing print job, otherwise you will simply be associating (linking) the selected output generators with that existing job, rather than creating a new one.
  2. If the selection contains output generators that cannot generate printed output, no new print job will be created.


Applied Parameters: ObjectKind=OutputMedium|PasteMode=PublishToPDF

Summary

This command is used to quickly create a new PDF output container - as part of the active Output Job Configuration file - and associate the selected output generators with that container.

Access

This command is accessed from the OutputJob Editor by dragging the selected output generators, and dropping onto the Output Containers region of the file - away from existing, defined output containers.

Use

First, ensure that the output generators you want to associate with the new PDF output container are selected. Then simply drag the selection and drop it onto an area of the Output Containers region, away from existing output containers. The new PDF output container will be created, added to the bottom of the current list of output containers, and named - using the names of the output generators in the selection - in the format:

New PDF <OutputGeneratorName1>,  <OutputGeneratorName2>, ..., <OutputGeneratorNamen>,

where n is the number of output generators in the original selection.

Tips

  1. Do not drop the selection over an existing PDF output container, otherwise you will simply be associating (linking) the selected output generators with that existing container, rather than creating a new one.
  2. If the selection contains output generators that cannot generate PDF output, no new PDF output container will be created.


Applied Parameters: ObjectKind=OutputMedium|PasteMode=PublishMultimedia

Summary

This command is used to quickly create a new Video output container - as part of the active Output Job Configuration file - and associate the selected output generators with that container.

Access

This command is accessed from the OutputJob Editor by dragging the selected output generators, and dropping onto the Output Containers region of the file - away from existing, defined output containers.

Use

First, ensure that the output generators you want to associate with the new Video output container are selected. Then simply drag the selection and drop it onto an area of the Output Containers region, away from existing output containers. The new Video output container will be created, added to the bottom of the current list of output containers, and named - using the names of the output generators in the selection - in the format:

New Video <OutputGeneratorName1>,  <OutputGeneratorName2>, ..., <OutputGeneratorNamen>,

where n is the number of output generators in the original selection.

Tips

  1. Do not drop the selection over an existing Video output container, otherwise you will simply be associating (linking) the selected output generators with that existing container, rather than creating a new one.
  2. If the selection contains output generators that cannot generate Video output, no new Video output container will be created.


Applied Parameters: ObjectKind=OutputMedium|PasteMode=GeneratedFiles

Summary

This command is used to quickly create a new Folder Structure output container - as part of the active Output Job Configuration file - and associate the selected output generators with that container.

Access

This command is accessed from the OutputJob Editor by dragging the selected output generators, and dropping onto the Output Containers region of the file - away from existing, defined output containers.

Use

First, ensure that the output generators you want to associate with the new Folder Structure output container are selected. Then simply drag the selection and drop it onto an area of the Output Containers region, away from existing output containers. The new Folder Structure output container will be created, added to the bottom of the current list of output containers, and named - using the names of the output generators in the selection - in the format:

New Folder Structure <OutputGeneratorName1>,  <OutputGeneratorName2>, ..., <OutputGeneratorNamen>,

where n is the number of output generators in the original selection.

Tips

  1. Do not drop the selection over an existing Folder Structure output container, otherwise you will simply be associating (linking) the selected output generators with that existing container, rather than creating a new one.
  2. If the selection contains output generators that cannot generate file-based output, no new Folder Structure output container will be created.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.