WorkspaceManager_Dlg-RevisionIdEditorFormCustom Revision ID_AD

現在、バージョン 2.1. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Dlg-RevisionIdEditorForm((Custom Revision ID))_AD の 5 をご覧ください。

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Custom Revision ID dialogThe Custom Revision ID dialog

Summary

The Custom Revision ID dialog allows you to manually specify the revision of the target item into which the generated data will be released.

Access

The dialog is accessed in the Configure Server Release stage (Stage 1) of the Project Releaser (Project » Project Releaser) by selecting Custom in the drop-down menu associated with the Target Revision entry. 

Options/Controls
 
Depending on the level revision naming scheme employed, there may be up to three Level ID types.
 
  • Level 2 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
  • Level 1 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
  • Level 0 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
The ID of the item's first planned revision can be changed at any point after the Item is created and before data is released into that initial revision (i.e. it is still in the Planned state).
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.