Altium NEXUS Documentation


Created: July 7, 2017 | Updated: September 18, 2017
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to export the active Multi-board Schematic document (*.MbsDoc), in PDF format.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.


This command is accessed from the Multi-board Schematic Editor by choosing the File » Export to PDF command from the main menus.


First, ensure that the Multi-board Schematic document that you wish to export, is open as the active document in the main design window.

After launching the command, the standard Save As dialog will appear. Use this dialog to determine where, and under what name, the exported PDF file is saved. By default, the PDF will be saved in the same location as the Multi-board Schematic document.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: