A variety of Radial Dimensions applied to a Board Assembly View.
The Draftsman document Radial Dimension is an automated dimensioning graphic that applies to circular hole objects in a Board Assembly View. The visual style of the dimension lines and the configuration of the dimension text data can be set in the Properties panel when a placed Radial Dimension is selected.
The Radial Dimension feature is available when a graphic object, such as a Board Assembly View, has been placed in a Draftsman document. Its placement is accessed from the Draftsman Editor as follows:
Choose the Place » Radial Dimension command from the main menus.
Click the button in the dimension objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
Right-click in the drawing design space then select Place»Radial Dimension from the context menu.
Click the entry in the dimensions menu () on the Drawing Annotations toolbar (View » Toolbars » Drawing Annotations to enable).
When the command is launched, the cursor will change to a crosshair, indicating Radial Dimension placement mode. To dimension a hole, object the placement steps are:
Hover the cursor over circular hole objects in a Board Assembly View. Each hole perimeter will be highlighted as an orange-colored outline.
Click on a highlighted hole outline to place the dimension target reference.
Move the mouse and click to set the position of the dimension text and its associated pointer line.
To cancel the placement mode, press Esc or right-click in the design space.
The size, and therefore, the number of holes that will be included in a Board Assembly View is determined by the Display Holes setting and its associated Minimum Diameter field in the Board Assembly View Properties. See the Properties panel's Properties region.
The Radial Dimension can be graphically modified by selecting any part of its graphic representation and then dragging its editing handle new location; its associated extension lines will adjust accordingly.
Select and drag the dimension's editing handle to a new position.
If dimensions created in a Draftsman document are snapped to a primitive that is removed from the PCB document, the dimension objects themselves are not removed and will remain greyed-out on the Draftsman document.
The non-graphical method of editing a Radial Dimension is available in the Draftsman Properties panel, which provides a wide range of editable properties and graphic options.
The Properties panel when Radial Dimension is selected.
To open the Properties panel and access the properties of a placed Radial Dimension:
After selecting the Radial Dimension object, select the Properties panel from the Panels button at the bottom right of the design space or select View » Panels » Properties from the main menus.
Double-click on the Radial Dimension object in the design space.
Right-click on the Radial Dimension then select Item Properties from the context menu.
If the Properties panel is already active:
Click on the Radial Dimension object to access its properties in the panel.
The Radial Dimension properties can be accessed prior to entering placement mode from the Draftsman - Defaults page of the Preferences dialog. This allows the default properties for the Radial Dimension object to be changed, which will be applied when placing subsequent Radial Dimensions.
Editing Multiple Objects
The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects can be modified.