PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

您正在阅读的是 17.1. 版本。关于最新版本,请前往 PCB_Dlg-JumpToPadNumber((Jump To Pad Number))_AD 阅读 22 版本
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Jump To Pad Number dialog.

The Jump To Pad Number dialog.

Summary

This dialog allows the designer to quickly jump to a specific pad within the design workspace, by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor only, by using the Edit » Jump » Pad command, from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls

  • Pad Number - use this field to specify the number of the pad you wish to jump to. This is its designator. To jump to the pad of a specific component, simply enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g. U3-12).

 

可用的功能取决于您的 Altium Designer 软件订阅级别