Altium Designer Documentation

Jump To Pad Number

Created: October 11, 2017 | Updated: October 11, 2017
您正在阅读的是18.0版本。 关于最新版本,请前往阅读22版本

The Jump To Pad Number dialogThe Jump To Pad Number dialog

Summary

This dialog allows you to quickly jump to a specific pad within the design workspace by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor by using the Edit » Jump » Pad command from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls

  • Pad Number - use this field to specify the number of the pad you wish to jump to. To jump to the pad of a specific component, enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g., U3-12).

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: