Altium Designer Documentation

Jump To String

Created: October 11, 2017 | Updated: October 11, 2017
您当前阅读的版本为20.0。 关于最新版本,请参阅: 版本 22 的

The Jump To String dialogThe Jump To String dialog


This dialog allows you to quickly jump to a specific text string within the design workspace by specifying the text.

If the target string is already displayed within the main design window, the cursor will simply jump to anchor point of the string - the point by which it is held during a move operation, or rotated around. If the string is out of view, the cursor will be positioned at the anchor point of the string, centered within the main design window (where possible).


The dialog can be accessed from the PCB Editor by using the Edit » Jump » String command from the main menus.

You can also use the J, S keyboard sequence directly from within the focused workspace.


  • String - use this field to specify the text string to which you want to jump. The string must be entered in its entirety. Alternatively, enter ? then click OK. The Strings dialog will appear, listing all text strings found within the active board document (free and children of other group objects). Use this dialog to quickly locate the string to which you want to jump.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: