Altium Designer Documentation

Match Nets

Created: May 4, 2016 | Updated: June 19, 2017

The Match Nets dialog

Summary

The Match Nets dialog allows you to manually match any unmatched schematic nets to unmatched PCB nets.

Access

The dialog is accessed by clicking Yes in the Match Manually dialog.

Options/Controls

  • Unmatched Nets 
    • Unmatched Reference Objects - lists the unmatched objects. Click  or  to open/collapse nets to view all objects included in the listed net.
    • Unmatched Target Objects - lists the target objects. Click  or  to open/collapse nets to view all objects included in the listed net.
  •  - click to match the selected reference and target objects and move the selected object(s) from the Unmatched Nets region to the Matched Pairs region.
  •  - click to move the selected object(s) from the Matched Pairs region to the Unmatched Nets region. This action will cause the moved objects to be unmatched.
  •  - click to move all objects from the Matched Pairs region to the Unmatched Nets region. This action will cause the moved objects to be unmatched.
  • Matched Pairs - lists the Reference Object and Target Object that are now matched.
  • Continue - click to accept your matching updates and open the Engineering Change Order dialog.

To learn more about how nets (and classes) are matched and the options that affect the matching process, refer to the Matching the Nets and Classes section of the Design Synchronization article.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: