Altium NEXUS Documentation


Created: June 12, 2016 | Updated: April 11, 2017

Parent page: SimView Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to run the Chart Options dialog, from where you can define various settings for the currently active chart in the Waveform Analysis window.


This command can be accessed from the SimData Editor by:

  • Choosing the Chart » Chart Options command from the main menus.
  • Right-clicking within the active chart (away from Y-axis and waveform names) and choosing the Chart Options command from the context menu.
  • Right-clicking on the chart's tab (at the bottom of the Waveform Analysis window) and choosing the Chart Options command from the context menu.


After launching the command, the Chart Options dialog appears. Use the dialog to define a name and title for the chart, and to define the X-axis, in terms of label, scale, and grid type.


  1. If one or both cursors have been added to a waveform, you can determine the cursor measurements to be displayed under the parent plot, through options available on the Chart Options dialog's Cursors tab.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: