Altium NEXUS Documentation

DeleteChart

Created: June 12, 2016 | Updated: April 11, 2017

Parent page: SimView Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to delete the active chart from the Waveform Analysis window.

Access

This command can be accessed from the SimData Editor by:

  • Choosing the Chart » Delete Chart command from the main menus.
  • Clicking the  button on the SimView toolbar.
  • Right-clicking on the chart's tab (at the bottom of the Waveform Analysis window) and choosing the Delete Chart command from the context menu.

Use

First, ensure that the chart you wish to delete is made active in the Waveform Analysis window. This is achieved by clicking on its corresponding tab at the bottom of the window.

After launching the command, a confirmation dialog will appear asking if you wish to proceed with the deletion. After clicking Yes, the chart will be deleted from the Waveform Analysis window.

Tips

  1. If using the Delete Chart command on the chart tab's right-click context menu, the chart will be directly deleted, without any confirmation dialog.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: