WorkspaceManager_Dlg-ECO_DecisionECO Decision_AD

Вы просматриваете версию 15.1. Для самой новой информации, перейдите на страницу WorkspaceManager_Dlg-ECO_Decision((ECO Decision))_AD для версии 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The ECO Decision dialog

The ECO Decision dialog

Summary

After chosing and comparing two documents, the Comparator lists any differences found between them. The ECO Decision dialog allows you to decide the direction of update (which of the compared documents to update) on an individual difference basis. It also allows you to specify that no update is required, which translates to no action being taken in either document.

In order to synchronize compared documents, the aim is to determine whether or not to take action for each difference and in which direction the change is made, specifying which document should be updated in order to remedy the difference.

Access

The dialog is accessed from the Differences between dialog by clicking the associated entry for a listed difference in the Update Decision column.

Options/Controls

  • Update Schematic - click to specify that the left-hand document be updated in order to resolve the difference.
  • Update PCB - clickto specify that the right-hand document be updated in order to resolve the difference.
The dialog shows Schematic and PCB sides for the update directions, since typically the design hierarchy of the project is compared against the PCB document.
The dialog provides indication of whether or not update in a particular direction is valid. If valid, the  and  buttons (for update to left or right respectively), will be enabled. If a change is not supported, the corresponding button for that update direction will be grayed-out.
  • No Updates - click to set the Update Decision to No Change (neither document is updated).

 

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.