PCB过滤器面板

您正在阅读的是 17.0. 版本。关于最新版本,请前往 PCB过滤器面板 阅读 21 版本
 

The PCB Filter panel.
The PCB Filter panel.

Summary

The PCB Filter panel allows you to construct filters through the creation of logical queries. A defined filter can then be applied to the active PCB, allowing you to select and edit multiple objects with great accuracy and efficiency.

Panel Access

  • To display the PCB Filter panel, click the PCB button at the bottom-right of Altium Designer when the PCB Editor is active and select PCB Filter from the pop-up menu.
  • Alternatively, you can access the panel through the View » Workspace Panels » PCB » PCB sub-menu.
  • The panel can also be accessed using the F12 shortcut key.

Panels can be configured to be floating in the editor space or docked to sides of the screen. If the PCB Filter panel is currently in a group of panels, use the PCB Filter tab located at the bottom of the panels to bring it to the front.

Panel Sections

The PCB Filter panel is composed of three regions. The first two, from the top, are selectable list areas which collectively define the scope of the filtering: Object and Layer.

If these are set to 'Components' and 'Top Layer' respectively, for example, the board view will highlight Top layer components. The selections in both panel sections represent the cumulative effect of multiple stages of filtering action, which can be used to quickly highlight any type of design object.

The Third region - Filter, at the bottom of the panel - displays the query created based on which objects and layers are currently selected.

Building Simple Filter Expressions

The main region of the panel provides controls for quickly building simple filter expressions targeting any combination of objects. Object types are arranged in an 'object matrix', categorized in accordance with being net objects (Net), component objects (Comp), or free objects (Free). The following core object list is replicated across these three groups:

  • Track
  • Arc
  • Via
  • Pad
  • Fill
  • Region

The Text object is available as part of the Comp and Free groupings, but, as this object type is not net-aware, it is not part of the Net grouping. In addition, the Free grouping also includes: Component, ComponentBody, Room, and Polygon.

If these are set to 'Components' and 'Top Layer' respectively, for example, the board view will highlight Top layer components. The selections in both panel sections represent the cumulative effect of multiple stages of filtering action, which can be used to quickly highlight any type of design object.

The Third region - Filter, at the bottom of the panel - displays the query created based on which objects and layers are currently selected.

The Text object is available as part of the Comp and Free groupings, but, as this object type is not net-aware, it is not part of the Net grouping. In addition, the Free grouping also includes: Component, ComponentBody, Room, and Polygon.

For the PCBLIB Filter panel, the Net and Comp groupings are not presented, nor the Component and Room object types.
The order of the columns is customizable. Simply click on a column's header and drag it horizontally to the required new position. Valid positions are highlighted by green positional arrows.

To use an object in the construction of a filter expression - thereby filtering by that object - simply enable the relevant check box associated with that object, within the object matrix. Commands available on the right-click context menu for the region enable you to quickly check or uncheck all entries in the matrix, or toggle the state of all checkboxes in the matrix, respectively.

Clicking on an object's name entry will cause all checkboxes associated to it in the matrix to become checked. Clicking again will cause all to become unchecked. Alternatively, click and drag - either in the object name colum, or in a particular group column - to check/uncheck multiple entries at once. Note that if selecting in this way includes at least one unchecked box, those unchecked boxes will become checked, and the boxes that were already checked will remain checked. However, if all boxes were already checked, the result will be to uncheck all boxes involved in the selection.

Use the Layer region of the panel to restrict the filter to a particular layer, or layers, or a specific class of layers. The entries listed reflect:

  • The defined layer classes for the board, the default of which are:
    • <All Layers>
    • <Component Layers>
    • <Electrical Layers>
    • <Signal Layers>
  • The defined layers in the layer stack (as presented in the Layer Stack Manager dialog).
  • The top and bottom paste mask layers.
Multiple layers can be selected for inclusion into the filter, by toggling the associated check box for each required layer accordingly.
The Layer region will automatically update if additional layer classes have been defined, or user-defined layer class names have been changed, through the Object Class Explorer dialog. It will also update to reflect any changes to layers in the layer stack.

As you make your filtering selections, the resulting query expression is built dynamically, and presented in the Filter region of the panel. Once the filter query expression has been defined as required, you then need to apply it as a separate action. Do this using the Apply button at the bottom of the panel. Alternatively, if you require application to only those objects that are currently selected in the workspace, use the Apply to Selected button instead.

The number of objects passing the filter - the number that remain displayed in the workspace - is indicated at the bottom-left of the panel. If no filtering is currently applied, this is reflected by the entry Not filtered.

Filtering by Object

The selection in the panel's Objects list will filter the board view to show primitive design objects. All objects will be highlighted, unless modified by the settings in the Groups and/or Layers filter lists.

Objects
The example board shown with Component Body and Pad (In Any Component)
selected under Objects. Layers is set to <All>.


The example board shown with Objects set to Tracks (In Any Net) and Pads (In Any Net).
Layers is set to <All>.

Filtering by Layer

The selection in the panel's Layers list will filter the board view to show objects on the nominated physical design layer (Signal, Mask and Silkscreen layers). All valid Layer objects will be highlighted, unless modified by the settings in the Groups and/or Objects filter lists.


The example board shown with Objects set to Components and
Pads (In Any Component). Layers is set to Top Layer.

The example board shown with Objects
The example board shown with Objects set to Tracks (In Any Net). Layers is set
to Bottom Layer.

To filter objects on the current layer only, select the <Active Layer> entry.

Selecting Filtered Objects

The collective filter action provided by the PCB Filter panel assists both viewing and selecting board design objects of interest.

Only highlighted (filtered) objects are selectable, making it easy to locate, edit and find information about the object. The PCB Inspector panel () provides a simple way to dynamically see the details of filtered objects as they are selected.

Only highlighted objects are selectable, and information is instantly available via the PCB Inspector panel.
Only highlighted objects are selectable, and information is instantly available via the PCB Inspector panel.

Objects that have the Locked parameter checked cannot be selected. Use the PCB panel to locate, select, and if necessary, unlock these objects.

Clearing the Filter

Clear the currently applied filter with the panel's  button.

Note that a filter applied to the design editor workspace is persistent and must be specifically reset, or over-ridden with another type of selection mechanism such as that of the PCB panel.

Setting the Visual Filtering

The visual result of the applied filtering on the document in the design editor window is determined by a series of highlighting controls toward the top of the panel. The effect that is imposed in the editor view can be set to Normal, Mask or Dim, where in practice, Mask has the most obvious highlighting effect.

The Normal / Mask / Dim dropdown list provides options for visibly contrasting filtered and unfiltered objects within the design editor window.

Select the type of visual filtering applied using the masking mode drop-down list.
Select the type of visual filtering applied using the masking mode drop-down list.

The visual highlighting effect for each masking mode:

  • Normal - Filtered objects are visible in the design editor window and the appearance of unfiltered objects remains unchanged.
  • Mask - Filtered objects are highlighted in the design editor window, with all other objects made monochrome
  • Dim - Filtered objects are highlighted in the design editor window, with all other objects retaining their colors, but shaded. 

Defining Filter Queries

The central region of the PCB Filter panel allows you to construct filters through the entry of logical queries.

You can type a query directly into the field, and as you type, a prompt list of possible keywords will appear as an aid.

Two facilities are available to provide aid in the creation of queries - the Query Helper and the Query Builder. These facilities can be very useful if you are unsure of the syntax of a query or the possible keywords that you may want to use.

Query Helper

To use the Query Helper, click the Helper button to open the Query Helper dialog. The underlying Query Engine analyzes the document and lists all available objects, along with generic keywords for use in queries.

Use the top section of the dialog to compose a query expression, using the available PCB Functions, PCB Object Lists and System Functions. The mid-section of the dialog provides a range of operators for use when constructing an expression. Use the Check Syntax button to verify that an expression is syntactically correct.

When the expression for the query has been defined as required, clicking OK will load the central region of the PCB Filter panel with the query, ready to apply the filter.

Query Builder

To use the Query Builder, click the PCB Filter panel's Builder button to open the Building Query from Board dialog.

This dialog enables you to create a query for targeting specific objects in the design document, by simple construction of a string of ANDed and/or ORed conditions.

The left-hand section of the dialog is where you specify the condition(s) that you require to target the set of objects needed. Initially the entry in the Condition Type/Operator column will be Add first condition. Clicking once on this entry will reveal a drop-down list of condition types.

The condition types listed will only reflect those relevant to a board design.

Select the condition and click in the Condition Value column to access a drop-down list of possible values for that condition type. As you define a condition in the left-hand section of the dialog, a preview of the currently built query is shown in the right-hand section.

Continue to add further conditions to narrow down your target set of design objects as required. Conditions can be ANDed or ORed together. The default logical operator is AND, which is automatically inserted when you add another condition.

To change the logical operator between conditions, click on the AND or OR entry in the Condition Type/Operator column and select the required operator. The preview of the query will update accordingly.

For more information about queries, see the Query Language Reference page.

Specifying Precedence

The  and  buttons at the top of the Building Query from Board dialog allow you to essentially add and remove brackets around the presently selected condition (increasing and decreasing indent). This allows you to create precedence for certain logically ANDed or logically ORed conditions.

For example, consider the following built query:
InNet('5V') AND (OnLayer('TopLayer')

The first condition has been set to the condition type Belongs to Net, with value 5V. Another condition has then been added, using the condition type Exists on Layer, with the value TopLayer.

Note that the outermost bracket pairing is added automatically by the Builder, and is not displayed while building the query expression.

At this stage, with the second condition selected in the dialog, the right arrow button has been clicked. Brackets have been automatically added around the second condition, and now the possibility to add a condition within that pair of brackets is available.

The third condition with condition type Object Kind is and value Track is then added within the brackets.

Use the Show Level drop-down at the top-left of the dialog to control the visual display of levels in your structured string of conditions. This essentially expands/collapses the display of brackets. Adding brackets effectively creates a new level. You can display levels 1-5, but for any further levels added use the Show All Levels option.

Alternatively, click on the expand  or contract  symbols (associated with a bracketed condition) to show the next level(s) or hide the current level (and all levels below) respectively. The  and  buttons at the top of the dialog can also be used to expand or collapse the currently selected condition.

Use the  and  buttons at the top of the dialog to move a selected condition in the query string being built. For a condition that has sub-levels (i.e. a bracketed condition), any condition in the level structure can be moved. When levels are expanded, a condition can be moved down or up through the levels. When levels are collapsed, a condition will be moved over the level structure.

To delete a condition, select it and either click the  button at the top of the dialog, or use the Delete key.

When the expression for the query has been defined as required, clicking OK will load the central region of the PCB Filter panel with the query, ready to apply the filter.

Additional buttons in this region of the panel provide access to previously used and favorite (stored) queries, as well as the ability to create design rules. The following drop-down sections look at these features in more detail.

Historical Queries

As you enter and apply a new query, it will be added to a query history list. Click the History button in order to access this list - the Expression Manager dialog will open, with the History tab active.

To use an historical query from the list, either select its entry and click on the Apply Expression button, or double-click on the entry directly. The dialog will close and the expression for the query will be loaded into the central region of the PCB Filter panel.

An historical query can be added to the list of favorite queries, by selecting its entry and clicking the Add To Favorites button. Use the Clear History button if you wish to 'flush' the history list. Up to nine most recently used query expressions from the list will be available for use from the panel's right-click menu.

Note that the content of the History list is common to (and accessible from) both the PCB Filter and PCBLIB Filter panels.

Favorite Queries

Any defined query may be added to a list of favorite queries in two ways:

  • By using the Add to Favorites command from the panel's right-click menu - to add the query expression currently defined in the central region of the panel.
  • By selecting an historical query entry in the History tab of the Expression Manager dialog and clicking the Add To Favorites button.

Click the Favorites button in the PCB Filter panel in order to access this list - the Expression Manager dialog will appear, with the Favorites tab active.

To use a favorite query from the list, either select its entry and click on the Apply Expression button, or double-click on the entry directly. The dialog will close and the expression for the query will be loaded into the central region of the PCB Filter panel.

When a query expression is added to the favorites list, it is assigned a unique name. By default, a generic name is assigned - Favorite_n - where n is the next available unused number. The name for an entry can be changed at any stage by using one of the following methods:

  • Selecting the query entry and clicking the Rename button.
  • Selecting the query entry and choosing the Change command from the available right-click menu.
  • Selecting the query entry and then clicking again within the Name field.

In each case, type the new name as required and click outside the Name field to effect the change.

To remove a query from the favorites list, select its entry in the list and either click on the Remove button or choose the Remove command from the available right-click menu. A dialog will appear requesting confirmation of the removal. Up to ten most recently added query expressions to the list will be available for use from the top of the panel's right-click menu. Note that the content of the Favorites list is common to (and accessible from) both the PCB Filter and PCBLIB Filter panels.

Creating Design Rules

The PCB Filter panel also provides the facility for creating a design rule, where its scope will use the currently defined query expression in the central region of the panel.

To add a new design rule, click on the PCB Filter panel's Create Rule button. The Choose Design Rule Type dialog will appear.

This dialog lists each of the rule categories and rule types that are available in the PCB document. Simply choose the type of rule you wish to create and click OK (or double-click directly on the entry). The PCB Rules and Constraints Editor dialog will appear.

The newly created rule name can be seen selected in the left side navigation tree. The rule query expression is in the dialog's top-right pane.

A rule of the chosen type is created and the main editing window for the rule is displayed, ready for you to define specific constraints for the rule. The query expression from the PCB Filter panel is entered into the Full Query region of the dialog. Refine the rule configuration settings as required, and apply the new rule.

Applying and Clearing the Filter

Once you have defined your query and set up the options in the panel as required, the filter can be applied - either by clicking the panel's Apply button or pressing Enter.

An applied example of the filter used above: IsTrack AND NOT InPoly AND InNet('5V') AND OnTopLayer. The visual result is zoomed, dimmed and the objects are not selected.

To clear the currently-applied filter from within the panel, clear (select and delete) the query expression in the central region of the panel and either click the Apply button or press Enter. All objects in the design workspace will be restored to full visibility and be available for selection/editing.

Alternatively, to clear filtering in the workspace, but leave the query expression loaded into the central region of the panel, use the Clear button at the bottom right of the design editor window.

Right-Click Menus

Right-clicking within the PCB Filter panel provides access to additional options and commands via pop-up menus.

Right-clicking in the Object or Layer region of the panel opens the following context menu options:

  • Toggle Check - Enable to toggle options. Currently selected options will be deselected, while deselected options will be selected.
  • Check All - Enable to select all available options.
  • Uncheck All - Enable to deselect all available options.

In addition to standard Cut/Copy/Paste commands, right-clicking in the Filter region of the panel opens the following context menu options:

  • Add to Favorites - use this command to add the query expression currently displayed in the central region of the panel to the list of favorite queries. The query will appear as a new entry on the Favorites tab of the Expression Manager dialog. As a query is added to the list of favorite queries, it will be displayed at the top of the right-click menu. The ten most recently added queries to the favorites list will be displayed on the menu (most recent at the top), enabling you to quickly access and reuse your favorite query expressions.

  • Organize Favorites - use this command to access the Favorites tab of the Expression Manager dialog, from where you can organize (rename, delete) entries in the list of favorite queries.
  • Examples - click to access a sub-menu of predefined example filters. Choosing an example filter will load the associated, underlying query expression into the central region of the panel.
  • History - click on this entry to access a sub-menu containing the nine most recently used query expressions, taken from the query history list for the panel.  Click on the More entry to access the History tab of the Expression Manager dialog, from where you can

Bear in mind that the content of both the Favorites and History lists are common to (and can be populated from) both the PCB Filter and PCBLIB Filter panels. Some query expressions may not return results when used in the PCB editor, especially if they have been created to target objects that are available within the PCB library editor only.

Tips

General

  • Pressing the F12 key will toggle the visibility of the panel in the workspace.
  • The Query Builder (Building Query from Board dialog) provides a simple method of constructing a query, using sensitive condition types and values that only allow you to build using relevant 'building blocks.' For advanced query construction, with full keyword specification and operator syntax, use the Query Helper dialog.
  • As the display options for objects passing and not passing the applied filter are separated, you can effectively apply new filter queries to build upon the results of previous filtering.
  • Filtering applied when using Queries from the PCB Filter panel is permanent for the session. A permanent filter must be cleared by clicking on a corresponding Clear button (e.g. at the bottom-right of the design editor window) or by applying an empty query from the PCB Filter panel.

When Building Query Expressions

  • It is highly advisable to use brackets whenever there is any possibility whatsoever that the query might not be correctly interpreted.
  • Brackets have the highest precedence within an order of precedence that has been defined for the various operators provided and which determines how queries are interpreted by the software (whenever the user has not provided brackets). The sequence of this order is as follows:
      Brackets
      Not
      ^, *, /, Div, Mod, And
      +, -, Or, Xor
      =, <>, <, >, <=, >=
      &&, ||
    This order of precedence is similar to that used in Pascal type languages. However, generous usage of brackets removes doubt and makes the resulting queries easier to read by others.
  • Ambiguities are resolved by working from left to right.
  • Parentheses are evaluated from inside to outside and equal levels are done left to right.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。

Content