Altium Designer Documentation

Custom Revision ID

Created: November 6, 2018 | Updated: November 6, 2018

The Custom Revision ID dialog

Summary

The Custom Revision ID dialog allows you to manually specify the revision of the target item into which the generated data will be released.

Access

The dialog is accessed in the Configure Server Release stage (Stage 1) of the Project Releaser (Project » Project Releaser) by selecting Custom in the drop-down menu associated with the Target Revision entry. 

Options/Controls
 
Depending on the level revision naming scheme employed, there may be up to three Level ID types.
 
  • Level 2 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
  • Level 1 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
  • Level 0 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
The ID of the item's first planned revision can be changed at any point after the Item is created and before data is released into that initial revision (i.e. it is still in the Planned state).
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: