Altium NEXUS Documentation

InfoPCBReport

Modified by Jason Howie on Apr 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to run the PCB Sales Quote dialog, from where you can generate a report for use in gaining quotations from fabrication houses.

Access

This command can be accessed from the CAMtastic Editor by:

  • Choosing the Reports » PCB RFQ Report command from the main menus.
  • Clicking the  button on the CAMtastic Standard toolbar.

Use

After launching the command, the PCB Sales Quote dialog will appear. The top section of the dialog is used to define the horizontal and vertical distances of the PCB border. Press the Select button - you will return to the main design window, the cursor will change to a small square, and you will be prompted to select the PCB border. Either select each of the individual traces that constitute the border, or drag a selection box around the border and right-click. The PCB Sales Quote dialog will reappear, with the border information calculated and entered.

The middle section of the dialog is used to define the minimum trace/gap, and smallest Dcode used in the design. Press the Select button - you will return to the main design window, the cursor will change to a small square, and you will be prompted to select objects to be used in the minimum trace calculations. Either select individual traces, or drag a selection box around an area of the design and then right-click. The PCB Sales Quote dialog will reappear, with the minimum width and smallest Dcode calculated and entered.

Press the Options button to open the PCB Report Options dialog. This dialog contains a number of further options that may be considered by a fabrication house when providing a quotation. Simply configure the options as required, specify the Panel Size and Report Units, and click OK. The PCB Sales Quote dialog will reappear again - click OK.

Generation of the report will proceed. An information dialog will appear alerting you to the fact that the report requires flashes to analyze the Paste layers properly. Click Yes to have the software automatically flash these layers. The finished report (PCBRFQReport.rpt) will open as the active document in the main design window and will appear in the Projects panel as a free document.

Tips

  1. Both the PCB Border and Minimum Trace/Gap sections of the PCB Sales Quote dialog must be completed before you can proceed with report generation.
  2. With respect to the minimum trace width and smallest Dcode, it is advisable to draw a selection box around the whole design, so that the smallest values are guaranteed to be used.
  3. The report is generated and saved automatically in the same folder as the CAM document.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。