Altium NEXUS Documentation

ToolsEpoxy

Modified by Jason Howie on Apr 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to add an epoxy bar between all occurrences of a selected flashed pad-pair combination, in the current document.

Access

This command is accessed from the CAMtastic Editor by choosing the Tools » SMT Stencil » Add Epoxy Bars command from the main menus.

Use

After launching the command, the cursor will change to a small square and you will enter epoxy bar addition mode. The procedure involves the following sequence of actions:

  1. Select an initial pair of flashed pads. Simply position the cursor above each pad in this initial pair and click.
  2. Right-click to access the Add Epoxy Bars dialog. Use this dialog to:
    • Define the width and height of the epoxy bar, in relation to its position between the two pads.
    • Choose to have the resulting epoxy bars drawn on the same layer, a new layer or any one of the existing layers in the current document.
    • Various other conversion options are available from the dialog, including the ability to set a flash tolerance - when searching pad-pairs for a match with the initial selected pad-pair - and whether to keep old pads, or delete them completely.
  3. After defining the options as required, clicking OK will return you to the main design window and you will be prompted to select the entire area to be considered for conversion. Simply drag a selection box around the whole design and then right-click once the area has become selected. The selected objects will be compared against the initial selected pad-pair, and all matches found will have an epoxy bar placed between them.
  4. Continue adding epoxy bars, or right-click, or press Esc, to exit.

Tips

  1. The Gap Factor of the epoxy bar indicates the width and height of the bar between the two pads. The width is a function of the horizontal distance between the pads (measured from the inside edge in each case). The height is a function of the vertical distance covered by the pads (measured from the top edge of the higher pad, to the bottom edge of the lower pad). Only values between 10 and 100 percent may be entered for these fields.
  2. If this command is used twice in a single design session, the Add Epoxy Bars dialog will only appear if the initial pad-pair is different to that selected the first time the command was run. Otherwise, it is assumed that you wish to apply the same settings, and you will be prompted to select the conversion area directly.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。