Altium NEXUS Documentation

ToolsMillAuto

Modified by Jason Howie on Apr 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: CommandMode=NC

Summary

This command is used to create a routing path around the entire board, using the PCB border.

Access

This command is accessed from the CAMtastic Editor by choosing the Rout » Auto-Rout PCB Border command from the main menus.

Use

First, ensure that the PCB border is a single, closed boundary. You may need to use the Join command to effect this.

After launching the command, the cursor will change to a small square and you will be prompted to select the corner of the border in which to position the plunge and retract points for the path. Simply position the cursor over the border and click - the corner selected will be the one closest to the position you click.

You will then be prompted to choose the routing direction. A guideline is provided relative to the selected corner of the border, to aid you. Position the cursor in the general direction that you wish to rout and click - the Auto Rout PCB dialog appears. Use this dialog to select the tool that you wish to use to rout the border, and also specify plunge and retract point extensions.

After defining the rout options as required, click OK. The rout path will be created and added to the rout layer.

Tips

  1. The direction point must be set in an adjacent position to the border's edge.
  2. If the tool you choose for the routing has no defined cutter compensation, a dialog will appear asking whether you wish to assign a default value. This default value will be the same size as the tool itself.
  3. At least one drill tool must be defined in order to use this command. If no tools have been defined, launching this command will bring up a dialog alerting you to this fact and you will be guided to the Tool Table dialog (Tables » NC Tools), from where you can load drill data from file, or enter tool definitions manually.
  4. The rout layer will be created (if it does not exist already) based on the name of the layer from which the PCB border was used.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。