Altium NEXUS Documentation

ToolsCreateToolPathCam

Modified by Jason Howie on Apr 11, 2017
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: CommandMode=NC

Summary

This command is used to create rout paths from selected traces in the current document.

Access

This command is accessed from the CAMtastic Editor by choosing the Rout » Create Rout Path(s) command from the main menus.

Use

Firstly, ensure that drill tools have been defined. If you have previously loaded an NC Drill file, tools for the design will have automatically been loaded and will appear in the Tool Table dialog (Tables » NC Tools). If no tools are currently defined, a dialog will appear alerting you to this fact when you try to launch the command, and you will have to define tools by importing a drill file, or by manual entry.

Once tools have been defined as required, launching the command will open the Select Mill/Drill Tool dialog. The dialog provides a drop-down list of all drill tools that are currently defined for the design. Select the tool that you wish to use for the routing and click OK. The cursor will change to a small square and you will be prompted to select the objects that you want to rout. Simply position the cursor over individual objects and click to add them to the selection, or use one of the many selection tools available. When all objects have been selected as required, right-click.

The selected objects will be routed and a rout layer will be created and added to the Layers list in the CAMtastic panel. The Create Rout Path(s) dialog will appear, from where you can change the tool used for the routing and its offset. You can also toggle the direction of the rout path(s) - plunge points will become retract points and vice versa. These changes are virtual and will only be applied permanently when the OK button is clicked.

Tips

  1. Routing is normally associated with traces. Often, pads are included in the selection and encountered along rout paths. Use the options in the Rout Pads Options dialog (Rout » Rout Pads Options) to determine how such pads should be handled. By default, round pads will be converted to drill points.
  2. Individually connected line segments will each have their own plunge and retract points. To have a single plunge and retract point, you must first join the individual segments. Conversely, plunge and retract points may be added to a rout path by breaking the path into segments.
  3. The rout layer will contain all rout paths and will, if enabled, display a number of rout-related symbols. These symbols reflect the plunge and retract points, and also the direction of each path.
  4. The following apertures cannot be used in a rout path: Custom, Diamond, Donut, Target, and Thermal.
  5. Be careful not to rout tracks and pads on signal/plane layers.
  6. Plunge and retract points will be inserted in default locations when a rout path is created. These, along with tool, offset, and routing direction, can be modified at any stage using the corresponding Modify Rout Path(s) command.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。