Altium NEXUS Documentation

SetCurrentLayerEx

Modified by Jason Howie on Apr 11, 2017
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: CAMtastic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: LayerName = Next

Summary

This command enables you to change the current layer for the design to the next layer in the Layers list.

Access

This command is accessed from the CAMtastic Editor, with the main workspace in focus, by using the + keyboard shortcut (on the numeric keypad).

Use

After launching the command, the next layer in the Layers list of the CAMtastic panel will become the current layer, with all other layers turned OFF.

Use the command repeatedly to cycle forward through all layers in the list.

Tips

  1. If the next layer in the list is turned OFF, using this command will turn it ON, and make it the current layer.
  2. Once the last layer in the list is reached, this command will not cycle to the first layer in the list.
  3. From the CAMtastic panel, the same functionality can be accessed by using the Down Arrow keyboard shortcut.
  4. To set the current layer to a specific layer directly, double-click on the required entry for that layer in the Layers list of the CAMtastic panel.


Applied Parameters: LayerName = Previous

Summary

This command enables you to change the current layer for the design to the previous layer in the Layers list.

Access

This command is accessed from the CAMtastic Editor, with the main workspace in focus, by using the - keyboard shortcut (on the numeric keypad).

Use

After launching the command, the previous layer in the Layers list of the CAMtastic panel will become the current layer, with all other layers turned OFF.

Use the command repeatedly to cycle back through all layers in the list.

Tips

  1. If the previous layer in the list is turned OFF, using this command will turn it ON, and make it the current layer.
  2. Once the first layer in the list is reached, this command will not cycle to the last layer in the list.
  3. From the CAMtastic panel, the same functionality can be accessed by using the Up Arrow keyboard shortcut.
  4. To set the current layer to a specific layer directly, double-click on the required entry for that layer in the Layers list of the CAMtastic panel.


Applied Parameters: LayerName = NextSignalPlane

Summary

This command enables you to change the current layer for the design to the next signal layer in the Layers list.

Access

This command is accessed from the CAMtastic Editor, with the main workspace in focus, by using the * keyboard shortcut (on the numeric keypad).

Use

After launching the command, the next signal layer in the Layers list of the CAMtastic panel will become the current layer, with all other layers turned OFF.

Use the command repeatedly to cycle forward through all signal layers in the list.

Tips

  1. If the next signal layer in the list is turned OFF, using this command will turn it ON, and make it the current layer.
  2. Once the last signal layer in the list is reached, this command will cycle to the first signal layer again.
  3. To set the current layer to a specific signal layer directly, double-click on the required entry for that layer in the Layers list of the CAMtastic panel.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。