Altium NEXUS Documentation

SnapGrid

Modified by Jason Howie on Apr 11, 2017
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: CAMtastic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Size=1Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 1mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 1 Mil command from the pop-up menu.
  • Choosing the 1 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 1mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=5Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 5mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 5 Mil command from the pop-up menu.
  • Choosing the 5 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 5mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=10Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 10mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 10 Mil command from the pop-up menu.
  • Choosing the 10 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 10mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=20Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 20mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 20 Mil command from the pop-up menu.
  • Choosing the 20 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 20mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=25Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 25mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 25 Mil command from the pop-up menu.
  • Choosing the 25 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 25mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=50Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 50mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 50 Mil command from the pop-up menu.
  • Choosing the 50 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 50mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=100Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 100mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 100 Mil command from the pop-up menu.
  • Choosing the 100 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 100mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=200Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 200mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 200 Mil command from the pop-up menu.
  • Choosing the 200 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 200mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=500Mil

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 500mil. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 500 Mil command from the pop-up menu.
  • Choosing the 500 Mil entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 500mil, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=0.025MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 0.025mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 0.025 mm command from the pop-up menu.
  • Choosing the 0.025 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 0.025mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=0.100MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 0.100mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 0.100 mm command from the pop-up menu.
  • Choosing the 0.100 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 0.100mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=0.250MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 0.250mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 0.250 mm command from the pop-up menu.
  • Choosing the 0.250 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 0.250mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=0.500MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 0.500mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 0.500 mm command from the pop-up menu.
  • Choosing the 0.500 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 0.500mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=1.000MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 1.000mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 1.000 mm command from the pop-up menu.
  • Choosing the 1.000 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 1.000mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=2.500MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 2.500mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 2.500 mm command from the pop-up menu.
  • Choosing the 2.500 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 2.500mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=5.000MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 5.000mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 5.000 mm command from the pop-up menu.
  • Choosing the 5.000 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 5.000mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: Size=7.500MM

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to 7.500mm. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the G keyboard shortcut, then choosing the 7.500 mm command from the pop-up menu.
  • Choosing the 7.500 mm entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the value for both the X Grid and Y Grid properties of the Snap Grid will be set to 7.500mm, and the grid will update accordingly in the workspace.

Tips

  1. The X and Y grid values can be changed as required, and independently for the snap grid, by editing the grid through the Enter Grid (1..1000mil) dialog, accessed by using the Ctrl+G keyboard shortcut.
  2. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  3. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.


Applied Parameters: None

Summary

This command is used to set the X (horizontal) and Y (vertical) step values - for the Snap Grid - simultaneously to a chosen value. These values together define the Snap Grid for manual movement and placement in the current document.

Access

This command is accessed from the CAMtastic Editor, by:

  • Using the Ctrl+G keyboard shortcut.
  • Using the G keyboard shortcut, then choosing the Set Snap Grid command from the pop-up menu.
  • Choosing the Set Snap Grid entry on the Grids drop-down () of the Utilities toolbar.

Use

After launching the command, the Enter Grid (1..1000mil) dialog will appear. Enter the same, or different values to be used for the X Grid and Y Grid properties of the Snap Grid, and click OK - the grid will update accordingly in the workspace.

Tips

  1. Display of the grid (On/Off), as well as grid sizing (Size X:Y), can also be managed from the CAM Editor - Drawing Modes page of the Preferences dialog. The size drop-down field lists previously used grid values, or simply enter new sizing directly, as required.
  2. The snap grid is used when the Object Snap mode is set to Grid. The object snapping mode can be changed on the CAMtastic panel, or on the CAM Editor - Drawing Modes page of the Preferences dialog. With the mode set to Grid, the cursor automatically snaps to the grid, positioning the reference point of the object being placed onto the nearest grid location.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。