Applied Parameters: None
This command is used to generate a text report of any violations that exist for the current document, after having run a Design Rule Check.
This command is accessed from the CAMtastic Editor by choosing the Reports » DRC/DFM command from the main menus.
First ensure that you have run a Design Rule Check on the current document.
After launching the command, a text report (DrcReport.rpt) will be generated and opened as the active document in the main design window.
The report gives a summary of the violations found and, for each rule check that has been violated, the number of violations Found, Fixed, and Remaining, are listed.
- If launching this command prior to running a Design Rule Check, a dialog will appear alerting you to the fact that you must run a DRC first, before a report can be generated.
- The report is generated and saved automatically in the \Users\<ProfileName>\AppData\Roaming\Altium\Altium NEXUS <GUID>\CAMtastic folder of your software installation. The report will appear in the Projects panel as a free document.
- Generating a new report will overwrite an existing report of the same name without warning.