ActiveBOM_Dlg-LineNumberOptionsDialogLine Number Options_AD

Вы просматриваете версию 20.0. Для самой новой информации, перейдите на страницу ActiveBOM_Dlg-LineNumberOptionsDialog((Line Number Options))_AD для версии 22
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21
 

The Line Number Options dialogThe Line Number Options dialog

Summary

The Line Number Options dialog is used to configure the numbering start value and increment.

Access

In an ActiveBOM, click the drop-down to the right of the Set Line Number button ( Set Line number button) then select the Line # options command.

Options/Controls

  • Start number - the value to use if the first Line # cell is empty.
  • Increment - increment each blank Line # field by this amount.
Click the main region of the Set Line Number button Set Line Number button to number the lines per the settings defined in the dialog.
The values entered in the dialog are retained for subsequent uses of the Line # command.

Tip

  • If all of the line numbers have already been defined and the Line # command is run again, the Line numbering dialog will open. 
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.

Content