Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 17.1
222120.220.120.019.119.018.118.017.117.016.116.015.1
Close
Поиск Search on Documentation

PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Created: июля 28, 2015 | Updated: июня 19, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу PCB_Dlg-JumpToPadNumber((Jump To Pad Number))_AD для версии 22

The Jump To Pad Number dialog.

The Jump To Pad Number dialog.

Summary

This dialog allows the designer to quickly jump to a specific pad within the design workspace, by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor only, by using the Edit » Jump » Pad command, from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls

  • Pad Number - use this field to specify the number of the pad you wish to jump to. This is its designator. To jump to the pad of a specific component, simply enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g. U3-12).

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.