PCB_Dlg-JumpToStringJump To String_AD

Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу PCB_Dlg-JumpToString((Jump To String))_AD для версии 22
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Jump To String dialog.

The Jump To String dialog.

Summary

This dialog allows the designer to quickly jump to a specific text string within the design workspace, by specifying the text.

If the target string is already displayed within the main design window, the cursor will simply jump to anchor point of the string - the point by which it is held during a move operation, or rotated around. If the string is out of view, the cursor will be positioned at the anchor point of the string, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor only, by using the Edit » Jump » String command from the main menus.

You can also use the J, S keyboard sequence directly from within the focused workspace.

Options/Controls

  • String - use this field to specify the text string that you wish to jump to. The string must be entered in its entirety. Alternatively, enter ? and click OK. The Strings dialog will appear, listing all text strings found within the active board document (free and children of other group objects). Use this dialog to quickly locate the string that you wish to jump to.

 

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.