PCB_Dlg-JumpToStringJump To String_AD

Вы просматриваете версию 19.0. Для самой новой информации, перейдите на страницу PCB_Dlg-JumpToString((Jump To String))_AD для версии 22
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

The Jump To String dialogThe Jump To String dialog

Summary

This dialog allows you to quickly jump to a specific text string within the design workspace by specifying the text.

If the target string is already displayed within the main design window, the cursor will simply jump to anchor point of the string - the point by which it is held during a move operation, or rotated around. If the string is out of view, the cursor will be positioned at the anchor point of the string, centered within the main design window (where possible).

Access

The dialog can be accessed from the PCB Editor by using the Edit » Jump » String command from the main menus.

You can also use the J, S keyboard sequence directly from within the focused workspace.

Options/Controls

  • String - use this field to specify the text string to which you want to jump. The string must be entered in its entirety. Alternatively, enter ? then click OK. The Strings dialog will appear, listing all text strings found within the active board document (free and children of other group objects). Use this dialog to quickly locate the string to which you want to jump.

 

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.