WorkspaceManager_Dlg-LineNumberingLine Numbering_AD

Вы просматриваете версию 19.1. Для самой новой информации, перейдите на страницу WorkspaceManager_Dlg-LineNumbering((Line Numbering))_AD для версии 22
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21
 

LineNumberingdlg_SetLineNumbers_AD19    LineNumberingdlg_ContinueNumbering

                                                                     Three variations of the Line numbering dialog

Three variations of the Line numbering dialog

Summary

The Line numbering dialog is used to select the action required when numbering the Line# column in an ActiveBOM document (*BomDoc).

Refer to the Line # Options dialog is used to configure the numbering start value and increment.

Access

The dialog is accessed from an ActiveBOM document (*BomDoc) by clicking the ActiveBON Line numbering button button. 

Options/Controls

Set Line Numbers Variation

LineNumbering dlg_Set Line Numbers

This variation of the dialog opens when ALL Line# cells in an ActiveBOM document (*BomDoc) are empty.
  • Set Line numbers for selected rows - click to use the existing numbers as references and continuously number the SELECTED empty cells, starting with the nearest non-empty cells above.
  • Set Line numbers for all rows - click to use the existing numbers as references and continuously number ALL empty cells, starting with the nearest non-empty cells above.

Continue Numbering Variation

LineNumbering Dlg_ ContinueNumbering

This variation of the dialog opens when SOME of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Continue numbering - click to use the existing numbers as references and continuously number empty cells starting from the nearest non-empty cells above.

  • Renumber all - click to delete all existing numbers and renumber all rows.

Renumber All Variation

LineNumbering dialog_ Renumber All

This variation of the dialog opens when ALL of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Renumber all - click to delete all existing numbers and renumber all rows.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.

Content