Altium Designer Documentation

Line Number Options

Created: May 30, 2019 | Updated: June 26, 2019
您当前阅读的版本为20.0。 关于最新版本,请参阅: 版本 22 的

Line number options dialogThe Line Number Options dialog


The Line Number Options dialog is used to configure the numbering start value and increment.


In an ActiveBOM, click the drop-down to the right of the Set Line Number button (Set Line number button) then select the Line # options command.


  • Start number - the value to use if the first Line # cell is empty.
  • Increment - increment each blank Line # field by this amount.
Click the main region of the Set Line Number button Set Line Number button to number the lines per the settings defined in the dialog.
The values entered in the dialog are retained for subsequent uses of the Line # command.


  • If all of the line numbers have already been defined and the Line # command is run again, the Line numbering dialog will open. 
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: